Sony MHC-GN880 Operating Instructions Manual page 9

1 Connect the front speakers.
Connect the speaker cords to the FRONT
SPEAKER terminals as shown below.
2 Connect the surround speakers.
(Except for MHC-GN660)
Connect the speaker cords to the
SURROUND SPEAKER terminals as
shown below.
3 Connect the subwoofer.
(MHC-GN880 only)
Connect the subwoofer cords to the
SUBWOOFER OUT terminals and the
system cord to the SYSTEM CONTROL
jack as shown below.
SUBWOOFER OUT terminal
Purple
SYSTEM CONTROL jack
To disconnect
White
Grey
Note
Be sure to make this connection before you connect the
main unit's power cord to a wall outlet.
4 Connect the FM and AM antennas.
Set up the AM loop antenna, then connect
it.
AM loop antenna
Extend the FM lead antenna
horizontally
5 For models with a voltage selector, set
VOLTAGE SELECTOR to the position
of your local power line voltage.
VOLTAGE SELECTOR
120V
230-
240V
6 Connect the power cord to a wall
outlet.
The demonstration appears in the display.
When you press ?/1
and the demonstration automatically ends.
If the supplied adaptor on the plug does not
fit your wall outlet, detach it from the plug
(only for models equipped with an adaptor).
220V
, the system turns on
continued
GB
9