Summary of Contents for Walther DigiViewPro
- Page 1 DigiViewPro Digital Night Scope Operating instructions 3 - 10 Bedienungsanleitung 11 - 18 Mode d´emploi 19 - 26 Manual de instrucciones 27 - 34...
- Page 2 Safety instructions Sicherheitshinweise Consignes de sécurité Instucciones de seguridad Maintenance Pflege Entretien Cuidados Description Benennung Désignation Designacion Operation Bedienung Utilisation Reglaje...
-
Page 3: Safety Instructions
SAFETY INSTRUCTIONS CAUTION Read these instructions carefully before using the device. This night scope is a sensitive optoelectronic, digital low-light amplifier and should be used only under low-light conditions. The image amplifier in the unit can be permanently damaged by strong light. The device is equipped with an infrared (IR) illuminator that can be used as an additional light source. -
Page 4: Maintenance
NOTES MAINTENANCE A special lens cloth is strongly recommended for cleaning the exterior. Do not use cloths or cleaning agents that could scratch the device or the optical components. When using the unit in rain or snow, dry it frequently with a dry, lint-free cloth and make sure that water does not get in. - Page 5 DESCRIPTION On/off button Infrared intensity adjustment Battery compartment Refresh rate adjustment Infrared illuminator Display brightness adjustment Objective lens / Rubber eye cup Focusing ring Display Ocular / focusing ring...
-
Page 6: Battery Change
BATTERY CHANGE Open battery compartment. Insert batteries. (Mind their polarities!) 4xAA Close battery compartment. If the battery indicator is blinking, the batteries are not supplying enough power. Replace the batteries. -
Page 7: Operation
OPERATION Engage the device (ON The display in the ocular will light up. Turn the unit to OFF when you are finished using it. Note: Power will be turned off automatically after 10 seconds of non-use. ADJUSTING Turn the ocular to focus the target image. - Page 8 SETTING THE INFRARED INTENSITY The device is equipped with an infrared (IR) illuminator that can be used as an additional light source. Use the mode button to adjust the intensity of the IR illuminator. + = Higher intensity - = Lower intensity The rubber eye cup protects your eye against injuries.
-
Page 9: Setting The Refresh Rate
SETTING THE REFRESH RATE Use the mode button to adjust the refresh rate of the display. The higher the frequency, the sharper the image and the smoother the motion of moving objects. + = Higher frequency - = Lower frequency frames/second frames/second frames/second... -
Page 10: Digital Zoom
DIGITAL ZOOM MAGNIFICATION To activate or deactivate the zoom, press one of the refresh rate buttons or one of the brightness buttons Magnification Magnification... - Page 11 LENGTH ALKALINE MAGNIFICATION INCLUDED We reserve the right to make color and design changes and technical improve- ments. No responsibility is accepeted for printing errors or incorrect information. Änderungen in Farbe und Design, sowie technische Verbesserungen, Druckfehler und Irrtum vorbehalten. Alle Angaben ohne Gewähr.
Need help?
Do you have a question about the DigiViewPro and is the answer not in the manual?
Questions and answers