Power Menu; Acpi Suspend Type; Acpi Apic Supp; Apm Configuration - Asus Motherboard P5V-VM DH User Manual

2.5

Power menu

The Power menu items allow you to change the settings for the Advanced
Configuration and Power Interface (ACPI) and the Advanced Power
Management (APM). Select an item then press <Enter> to display the
configuration options.
Main Advanced

ACPI Suspend Type

ACPI APIC support

APM Configuration

Hardware Monitor
F1:Help
ESC: Exit
2.5.1 2.5.1 ACPI Suspend Type [S1&S3] ACPI Suspend Type [S1&S3]
2.5.1 2.5.1 2.5.1 ACPI Suspend Type [S1&S3] ACPI Suspend Type [S1&S3] ACPI Suspend Type [S1&S3]
Allows you to select the Advanced Configuration and Power Interface
(ACPI) state to be used for system suspend.
Configuration options: [S1(POS)] [S3(STR)] [S1&S3]
2.5.2 2.5.2 2.5.2 ACPI APIC Support [Enabled] ACPI APIC Support [Enabled] ACPI APIC Support [Enabled]
2.5.2 2.5.2 ACPI APIC Support [Enabled] ACPI APIC Support [Enabled]
Allows you to enable or disable the Advanced Configuration and Power
Interface (ACPI) support in the Application-Specific Integrated Circuit
(ASIC). When set to Enabled, the ACPI APIC table pointer is included in the
RSDT pointer list. Configuration options: [Disabled] [Enabled]
2.5.3 2.5.3 2.5.3 APM Configuration APM Configuration APM Configuration
2.5.3 2.5.3 APM Configuration APM Configuration
Power Up By PS/2 Mouse
Power Up By PS/2 Keyboard
Power Up On PCI/PCIE Devices
Power On By External Modem
Power On By On-board LAN
Power On by RTC Alarm
x Date (of Month) Alarm
x Alarm Time (hh:mm)
Restore on AC Power Loss
PWR Button < 4 secs
F1:Help
ESC: Exit
2 - 2 8 2 - 2 8 2 - 2 8
2 - 2 8 2 - 2 8
Phoenix-Award BIOS CMOS Setup Utility
Power Boot Exit
[S1&S3]
Enabled
↑↓ ↑↓ ↑↓ ↑↓ : Select Item ↑↓
→← →← →←: Select Menu →← →←
Enter: Select Sub-menu
Phoenix-Award BIOS CMOS Setup Utility
Power
APM Configuration
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
0
0 : 0 : 0
[Power Off]
[Instant-Off]
↑↓ ↑↓
↑↓ : Select Item ↑↓ ↑↓
→← →←
→← →←: Select Menu →←
Enter: Select SubMenu
-/+: Change Value F5: Setup Defaults
-/+: Change Value
C h a p t e r 2 : B I O S s e t u p C h a p t e r 2 : B I O S s e t u p C h a p t e r 2 : B I O S s e t u p
C h a p t e r 2 : B I O S s e t u p C h a p t e r 2 : B I O S s e t u p
Select Menu
Item Specific Help
Select the ACPI state
used for System
Suspend.
F10: Save and Exit
Select Menu
Item Specific Help
Press [Enter] to
select
F5: Setup Defaults
F10: Save and Exit