Zenith DVB352 Series Service Manual page 56

DECK MECHANISM DISASSEMBLY
Fig.(B)
MOTOR ASSEMBLY MAIN
GEAR WHEEL MAIN
MOTOR ASSEMBLY MAIN
4. Base Assembly Main(Fig. 4-4)
Note
Put the Base Assembly Main face down(Bottom Side).
4-1. PCB Assembly Main Mode
1)Unconnect the Connectors (C8), (C9).
2)Release three Screws(S9).
Note
When reassembling, align the Mode Switch position as
Fig.(A).
Put the Base Assembly Main on original position(Top Side)
4-2. Gear Slider
1) Release Screw(S10).
4-3. Gear Exchange
1) Release Screw(S11).
4-4. Gear Main
1) Release Screw(S12).
(S12)
(S11)
GEAR EXCHANGE
GEAR LOADING
(S15)
(S15)
(S14)
(L4)
MODE SWITCH
Fig.(A)
(S10)
GEAR SLIDER
GEAR MAIN
GEAR UP/DOWN
(S13)
Fig.(C)
(S9)
PCB ASSEMBLY MAIN MODE
(S9)
Fig. 4-4
Note
4-5. Gear Up/Down
1) Release Screw(S13).
4-6. Gear Wheel Main
1) Release Screw(S14).
4-7. Gear Loading
4-8. Motor Assembly Main
1) Release 2 Screws(S15).
2) Unlock the Locking Tab(L4).
4-9. Base Main
4-4
BASE MAIN
(C8)