Monoprice DA-6710 User Manual

Condition 2: Powering via Set Top Box or Digital Tuner of TV set
Please be noticed, in this installation, you need to make sure that your
STB or Tuner can send 5VDC via the RF input port.
Step 1-Take out the main unit DA-6710.
Step 2.Take out the standing unit, hook to the main unit.( as figure2f it is
suggested to use horizontal installation )
Step 3. Make sure the switch is set to "STB" position, If your STB need to turn
on the powering, please turn it on.
STB or Digital TV
When you finished the installation, you can use your Set Top Box to
check the signal strength and quality. If the quality is not good enough to
have good picture, you can move the antenna to get the best reception
position. Or you can change the orientation of the antenna, (there are 3
position for change the direction of antenna, you can change the
direction to get the best reception). When you find the best position,
please fixed it..
Digital Indoor
Antenna
MODEL: DA-6710
Thanks for your purchasing this Digital Indoor Antenna.
Before your installation,
Please read this manual carefully and keep this manual
for further information.
INTRODUCTION
DA-6710 is special designed antenna for digital terrestrial broadcasting
reception. With state-of-art low noise amplifier technology and circuitry, it will
provide best reception. And compact and stylish housing,
Feature:
• Compact and Stylish design
• Horizontal and Vertical installation
• Frequency Range: 47-870MHz with FM trap
• Gain 20dB±3dB
• Low noise amplifier technology
• High Directionality
• FM trap circuit design, prevent FM signal interference