Mazda 5 2015 Owner's Manual page 353

Mazda5_8DW4-EC-14H_Edition3 Page353
Friday, January 16 2015 4:27 PM
(Mexico)
Use SAE 0W-20 engine oil. If SAE 0W-
20 engine oil is not available, use SAE
5W-20, 5W-30 engine oil.
The quality designation SM, or ILSAC
must be on the label.
–40 –20
–30 –10
–40 –20
0 20
qInspecting Engine Oil Level
1. Be sure the vehicle is on a level
surface.
2. Warm up the engine to normal
operating temperature.
3. Turn it off and wait at least 5 minutes
for the oil to return to the oil pan.
Form No.8DW4-EC-14H
(ILSAC)
0 10 20 30 40
40 60 80 100
I n f o r ma t i o n P r o v i d e d b y :
Black plate (353,1)
Owner Maintenance
4. Pull out the dipstick, wipe it clean, and
reinsert it fully.
Type A
Type B
5. Pull it out again and examine the level.
The level is normal if it is between
Low and Full.
If it is near or below Low, add enough
oil to bring the level to Full.
CAUTION
Do not add engine oil over Full. This
may cause engine damage.
6. Make sure the O-ring on the dipstick is
positioned properly before reinserting
the dipstick.
Maintenance and Care
Full
OK
Low
Full
OK
Low
8-21