Page 2
• USB power supply cable • Quick Start Guide Additional Bundle Parts (Art. 68140, Art. 69140): • Antenna cable (cable length 20 m) (Art. 68240, Art. 69240): • Antenna cable (cable length 20 m) • ADS-B USB Dongle • SMA/MCX-pigtail • Small indoor antenna (Art. 66077): • Radarcape • Antenna cable (cable length 20 m) • Wall plug power supply • 5 m network cable • GPS antenna (cable length 5 m) Quick Start Guide...
Page 3
Connections 1. Connect the „ Active Diapason“ Antenna with the antenna cable to the Bias Tee, place the antenna as free and as high as possible. Make sure that the antenna has a conductive connection to ground to avoid damage of Radarcape or Internet router! 2. Connect the Bias Tee to the receiver (e.g. Radarcape/ Dongle). To connect the USB Dongle use the SMA/MCX-pigtail. 3. Connect the USB power supply cable to the Bias Tee and a free USB port e.g. the front slot of the Radarcape. 4. Connect the receiver as specified in the receiver‘s manual.
Caution: Static electricity around the antenna can damage your R or Internet router if there is no ground connection! Do NOT mount the antenna on isolated ground e.g. woo or without any connection to ground! Hardware Installation Caution: Static electricity around the antenna can damage your Radarcape or Internet router IMPORTANT! conductive...