[Ois Mode]; Optical Image Stabilizer; [Auto Bracket]; Taking Pictures Using Auto Bracket - Panasonic DMC-L1K Operating Instructions Manual

[OIS MODE]

Optical Image Stabilizer

MENU
Press [ ] to display the [REC] mode
SET
menu and select the item to set. (P77)
This mode detects jitter and compensates
for it.
• Check that the [O.I.S.] switch on the lens
is set to [ON].
[MODE1] The stabilizer operates
( ) continuously and can assist
during photo composition.
[MODE2] The jitter is compensated for
( ) when the shutter button is
pressed. There is a greater
stabilizing effect.
• The stabilizer function may not be
effective in the following cases.
– When there is a lot of jitter.
– When the zoom magnification is high.
– When using the digital zoom.
– When taking pictures while following a
moving subject.
– When the shutter speed becomes
slower to take pictures indoors or in dark
places.
Be careful of camera jitter when you press
the shutter button.
• You cannot select [OIS MODE] if you use
a lens with no stabilizer function.

[AUTO BRACKET]

Taking Pictures using Auto
Bracket
MENU
Press [ ] to display the [REC] mode
SET
menu and select the item to set. (P77)
In this mode, up to 5 pictures are recorded
in the selected exposure compensation
range each time the shutter button is
pressed.
You can set the number of pictures
recorded, the compensation range of the
exposure and the bracket order.
Refer to P69 for more information.
[AF/AE LOCK]
AF-L
AE-L
Switching the [AFL/AEL]
button setting
MENU
Press [ ] to display the [REC] mode
SET
menu and select the item to set. (P77)
You can set [AFL/AEL] to [AF], [AE] or [AF/
AE] if you want to fix the focus or the
exposure when taking a picture.
Refer to P66 for more information.
[BURST RATE]
Setting the burst speed
MENU
Press [ ] to display the [REC] mode
SET
menu and select the item to set. (P77)
You can set the burst speed to high speed
[H] or low speed [L].
Refer to P67 for more information.
Menu Settings
85
VQT0W88