Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Proluxe 6000
Summary of Contents for Proluxe 6000
- Page 1 6000 / 7000 Upright Vacuum Instruction Manual...
- Page 2 Warranty Information Congratulations on the purchase of your Prolux 6000 or 7000 Vacuum! This manual covers the Prolux model 6000 and 7000. The Prolux 6000 & 7000 models are high end vacuums that are attractive, powerful and designed to last for many years to come.
-
Page 3: Important Safety Instructions
and keep this booklet as a permanent record of your purchase. Model Number: _______________________________________________________ Serial Number: _______________________________________________________ Date Purchased: ______________________________________________________ IMPORTANT SAFETY INSTRUCTIONS Read all instructions before using this appliance When using your vacuum cleaner, basic precautions should always be followed, including the following: WARNING -To reduce the risk of fire, electric shock, or injury:... - Page 4 vacuum cleaner dealer for repair. 9. Do not pull or carry by the cord, use the cord as a handle, run appliance over cord, close a door on the cord, or pull the cord around sharp edges or corners. Keep the cord away from heater surfaces. 10.
- Page 5 If the plug still fails to fit, contact a qualified electrician to replace the outlet. Do not attempt to alter the plug thus defeating the safety purpose of the polarized plug. SAVE THESE INSTRUCTIONS. Models 6000 & 7000 are intended for household and light office use only.
-
Page 6: Feature Comparison Chart
FEATURE COMPARISON CHART Feature/Mod Input Power Full Head Cord (amps) Control Indicator Light Length 6000 12.0 1-Speed 25 feet... - Page 7 FEATURE COMPARISON CHART Feature/Model Input Power Full Head Cord (amps) Control Indicator Light Length (LED) 7000 12.0 1-Speed 30 feet...
- Page 8 How To Use Friction Fit Cleaning Tools: Model 6000...
- Page 9 The tools are connected by friction fit. Meaning to attach simply shove together and twist firmly. To remove simply untwist.
- Page 10 EASY ASSEMBLY INSTRUCTION Step One: Attaching the Handle 1. Remove handle screw. 2. Insert handle into top of dust cover with handle switch facing forward (Model 7000 only) 3. Align small hole on handle with screw hole in dust cover. Insert screw and tighten securely (All models).
- Page 11 Replacing the Dust Bag: *Remember: Always have a dust bag installed when operating your vacuum cleaner. Replace with a genuine dust bag when full. 1. Push down on knob at top of dust cover to open compartment. 2. Pull cardboard bag collar off holder. Remove and discard used dust bag. 3.
- Page 12 is needed, release the right tab on underside of bag supporter. Lift and rotate bag supporter to remove. 3. Remove secondary filter from bottom dust compartment. 4. Replace secondary filter with new filter. 5. Reinstal support Checking the Post Filter: The auxiliary post filter captures fine dust particles and purifies air exiting your vacuum cleaner.
-
Page 13: Handle Adjustments
Special Features Make Your Vacuum a Peak Performer! ON/OFF Switch: Model 6000 Vacuum Cleaners have a simple toggle switch on the dust compartment. Push down --- to start. Push down O to stop. Model 7000 is equipped with a convenient handle slide switch to turn power ON and OFF. - Page 14 On-board Cleaning Tools: Model 7000 Model 7000 is equipped with state-of-the- art on-board cleaning tools including: • 2 piece telescoping wand • Extension wand • Crevice tool • Dusting brush • Upholstery tool To use: 1. Remove 2 piece telescoping wand from wand retainer. 2.
- Page 15 Connecting the Tools: Connect any of the cleaning tools to the extension wand or curved wand and twist for secure fit. Twist and pull apart to remove. Suction Control: Model 6000 & 7000 reduce suction when...
-
Page 16: Replacing Headlight Bulb
2. Slide the two latches inward to release bottom plate. Step Two: Changing the Headlight Bulb Model 6000 1. Use any standard bayonet base appliance bulb rated 120-130 V, 15 W. 2. Remove the two frame screws. - Page 17 5. Replace with new bulb, turn clockwise. 6. Reinsert the headlight assembly back into the nozzle housing being careful not to pinch or re-arrange any wires and insert the two frame screws. Reinsert bottom plate making certain that the hinges are in place on the front of the housing before sliding the two latches outward to fasten.
- Page 18 1. Unplug the power cord. 2. Turn the unit over and remove the bottom plate as previously described under “Replacing Headlight Bulb Step One” on previous page. 3. Lift the rear belt cover up and back. 4. Remove the vented support fitting, noting position. 5.
- Page 19 Changing the Agitator Brushes: Replace agitator brushes when they are worn or when the bristles do not touch a card held across the base plate. Replace all four brushes at the same time to maintain maximum cleaning performance. Remove agitator, start as described on previous page, Section 1 to 4. 1.
-
Page 20: For Best Performance
For Best Performance: 1. Keep machine and all accessories clean and in proper operating condition. 2. Change dust bags and filters as recommended to maintain optimum cleaning efficiency. 3. Always use genuine dust bags and filters. Use of other products may result in unsatisfactory cleaning or filtration performance. -
Page 21: Cleaning The Nozzle
ProLux Limited Warranty What this limited warranty covers: ProLux Vacuum warrants that your domestic model Prolux 6000, the entire vacuum shall be covered for a period of two years and three years for the motor. ProLux Vacuum warrants that your domestic model Prolux 7000, the entire vacuum shall be... - Page 22 What this limited warrant does not cover: • Expenses related to pick up, delivery or house calls. • Parts of the cleaner that require replacement under normal use, such as disposable dust bags, filters, drive belts, light bulbs, and brushroll bristles. •...
Need help?
Do you have a question about the 6000 and is the answer not in the manual?
Questions and answers