Precautions - Sony SMP-N200 Operating Instructions Manual

Precautions

This equipment has been tested and found to
comply with the limits set out in the EMC Directive
using a connection cable shorter than 3 metres.
On placement
• Place the player in a location with adequate
ventilation to prevent heat build-up in the player.
• Do not place any cloth on the player, do not place
any objects in front of the player, and do not place
the player on soft surfaces such as a rug, as it may
block the ventilation holes.
• Do not install this player in a confined space, such
as a bookshelf or similar unit.
• Do not place the player in a location near heat
sources, or in a place subject to direct sunlight,
excessive dust, or mechanical shock.
• Do not place the player outdoors, in vehicles, on
ships, or on other vessels.
• Do not install the player in an inclined position. It
is designed to be operated in a horizontal position
only.
• Do not place metal objects in front of the front
panel. It may limit reception of radio waves.
• Do not place the player in a place where medical
equipment is in use. It may cause a malfunction of
medical instruments.
• If you use a pacemaker or other medical device,
consult your physician or the manufacturer of
your medical device before using the wireless
LAN function.
• This player should be installed and operated with
a minimum distance of at least 20 cm or more
between the player and a person's body
(excluding extremities: hands, wrists, feet and
ankles).
• Do not place heavy or unstable objects on the
player.
• Disconnect the AC power cord (mains lead) and
all other cables from the player when you move
the player.
On power sources
• The player is not disconnected from the AC
power source (mains) as long as it is connected to
the wall outlet, even if the player itself has been
turned off.
• Disconnect the player from the wall outlet if you
are not going to use the player for a long time. To
disconnect the AC power cord (mains lead), grasp
the plug itself; never pull the cord.
• Observe following points to prevent the AC
power cord (mains lead) being damaged. Do not
use the AC power cord (mains lead) if it is
damaged, as doing so may result in an electric
shock or fire.
– Do not pinch the AC power cord (mains lead)
between the player and wall, shelf, etc.
– Do not put anything heavy on the AC power
cord (mains lead) or pull on the AC power cord
(mains lead) itself.
On AC adapter
• Use the supplied AC adapter (AC-NX1W) for
this player, as other adapters may cause a
malfunction.
• Do not disassemble or reverse-engineer.
• Do not confine the AC adapter in a closed place
such as a bookshelf or an AV cabinet.
• Do not connect the AC adapter to a traveler's
electric transformer, which may generate heat and
cause a malfunction.
• Do not drop or apply shock.
On adjusting volume
Do not turn up the volume while listening to a
section with very low level inputs or no audio
signals. If you do, your ears and the speakers may
be damaged when a peak level section is played.
On cleaning
Clean the cabinet, panel, and controls with a soft
cloth. Do not use any type of abrasive pad, scouring
powder or solvent such as alcohol or benzine.
On replacement of parts
In the events that this player is repaired, repaired
parts may be collected for reuse or recycling
purposes.
On connecting to the HDMI OUT jack
Observe the following as improper handling may
damage the HDMI OUT jack and the connector.
• Carefully align the HDMI OUT jack on the rear
of the player and the HDMI connector by
checking their shapes. Make sure the connector is
not upside down or tilted.
,continued 3