Use Dab Menus - Philips AZB600 User Manual

Use DAB menus

1
In DAB mode, press MENU to access the
DAB menus.
2
Press / to toggle through the menus.
[FULL SCAN]:Scan for the DAB
•
stations.
• [MANUAL]: Tune to a station manually.
[DRC]:Enable or disable DRC.
•
[PRUNE]: Remove invalid stations
•
[SYSTEM]: Access system setting menu.
•
3
Press OK to enter the menu.
Re-scan for stations
Full scan is used to perform a wide range
search for DAB radio stations.
• Press OK to activate the automatic search.
» This product automatically stores radio
stations with sufficient signal strength.
Tune to a station manually
With this feature, you can tune to a specific
channel/frequency manually. In addition to
antenna orientation for better radio reception,
the optimal reception can also be obtained with
this feature.
1
Press OK to access the station list.
2
Press / to select a station.
3
Press OK to confirm the option.
DRC (Dynamic Range Control)
DRC adds or removes a degree of
compensation for the differences in the dynamic
range between radio stations.
1
Press OK access the sub-menus.
2
Press / to select an option.
[DRC OFF]: No compensation applied.
•
[DRC LOW]: Medium compensation
•
applied.
• [DRC HIGH]: Maximum
compensation applied.
EN
14
3
Press OK to confirm the selection.
Remove invalid stations
This option lists active stations and removes any
stations that are in the list but have no service
in your area.
1
Press OK to access the [PRUNE] menu.
2
Press / to select an option.
[N]: Return to the previous menu.
•
[Y]: Remove invalid stations from the
•
station list.
3
Press OK to confirm the selection.
System menus
1
Press OK to access system menu.
2
Press / to to select a sub-menus.
• For details, refer to the section 'Use
system menus'.