Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Sinergex Nitro 6000
Summary of Contents for Sinergex Nitro 6000
- Page 1 6000 Digital Intelligent Battery Charger OPERATOR’S MANUAL...
- Page 2 Thanks for purchasing a Nitro Digital Battery charger and trusting your battery’s care to Sinergex. The Nitro chargers are some of the most advanced chargers available. Before operation please read the following instructions and warnings carefully to ensure safe charging.
- Page 3 The mains supply cord of this appliance can not be replaced; if • the cord is damaged, the appliance should be discarded. WARNING! Avoid getting battery fluid (electrolyte) on your skin or clothes. • It is acidic and can cause burns. If this occurs you should rinse the affected area with water immediately.
- Page 4 INTRODUCTION The Sinergex Nitro 6000 is member of the family of advanced battery chargers manufactured by Sinergex Technologies. Nitro chargers will increase your battery’s performance and prolong its life. Please carefully read and follow the following safety and operating instructions.
- Page 5 NITRO 6000 Intelligent Battery Charger with 9.0 AMPS RMS – Charges 12 VDC Batteries. 6.0 AMPS DC – Automatic and Intelligent 4-Stage Charging Curve Soft Start: Initial battery test to determine battery condition. If the battery is severely discharged charger will begin the Soft Start stage.
-
Page 6: Voltage Compensation
Charging voltage can be lost while travelling through the cables from the charger to the battery resulting in low voltage at the battery terminals. The Nitro 6000 compensates for this drop and automatically adjusts to maximize the charge being delivered to your battery. -
Page 7: Other Features
CHARGER MEMORY In the event of a black-out or loss of AC power, the Nitro 6000 automatically memorizes the selected charging mode. When AC power is restored, the charger will continue in the selected mode. ATTENTION: When AC power is connected and the connection to the battery is disconnected, this memory is erased and the charging mode will need to be reselected. -
Page 8: Operation
Always refer to the manufacturer’s instructions regarding charging and charging rates and battery maintenance. OPERATION The Nitro 6000 is suitable for charging 12 Volt Normal Lead Acid, Sealed, AGM and or Gel Batteries between 10 – 120 Amp Hours. 1. CONNECTION The N-6000 has two options for connecting the charger to the battery. - Page 9 Connect the charger’s AC power cable to an AC power outlet. Once you have connected the Nitro 6000 to AC power, it will sound a tone for 0.5 seconds and the Simple Touch power panel LEDs light for two seconds.
-
Page 10: Troubleshooting
If you require an alternative selection, proceed as follows: STEP 1 – Select the desired charge current: 2 Amps or 6 Amps. STEP 2 – Select the battery type. GEL or Standard. “GEL” or “STD”. GEL indicates a common Maintenance Free battery, e.g. Gel Cell, VRLA, AGM &... -
Page 11: Battery Fault
“START” LED to turn OFF. Reconnect the DC clamps to battery and follow the OPERATION steps as described in P.8. BATTERY FAULT A few seconds after switching THE Nitro 6000 on, the LED indicator “FAULT” will illuminate if the following occurs: A. Low battery voltage - < 3 V B. -
Page 12: Charging Time
When AC power is disconnected the charger will turn off and discontinue charging. The battery charger automatically switches back to the “Stand By” mode if the charger DC clamps are removed from the battery while the AC cable is still connected to the AC power supply. CHARGING TIME The table below is a guide to the typical charge time for different batter sizes of 12 V /6 Cell batteries:... -
Page 13: Warranty
WARRANTY Sinergex Technologies warrants this product for a period of 2 years from the date of purchase to the original purchaser. Warranty is not transferable. Warranty covers defect against workmanship and materials only. To obtain warranty service, please return the unit to the place of purchase or authorized Sinergex dealer together with your proof of purchase.
Need help?
Do you have a question about the Nitro 6000 and is the answer not in the manual?
Questions and answers