Advertisement
WIRELESS VIDEO MONITORING SYSTEM
LW2770 SERIES
QUICK START GUIDE
C. On-Screen Display
1. Signal Indicator: Indicates the strength of the
10. Overwrite Icon: Indicates Overwrite mode is
signal being received from the camera.
on, the system will overwrite the oldest recordings
2. SD Card Icon: Indicates that an SD card is
when the memory card is full.
inserted. Tap the icon to playback recorded videos.
11. Channel Indicator: Indicates the camera you
3. New File Icon: Indicates that there are new
are presently viewing.
recordings saved to the SD card.
12. Battery Indicator: Indicates remaining battery
4. Manual Recording: Activate / deactivate
life.
manual recording.
13. Motion Recording: Activate / deactivate
5. Network Status Indicator: Indicates the
motion recording.
network status of the receiver.
14. Quad / Sequence Viewing: Switch between
6. Microphone Icon: Indicates that the talk
Quad mode (up to 4 channels) and Auto Sequence
function has been enabled on the receiver.
mode (automatically cycles through channels).
7. SEQ Icon: Indicates the monitor is on Auto
15. Time Stamp: Displays the current date and time
Sequence viewing mode.
on the system.
8. Download Icon: Indicates that a new firmware
16. Main Menu: Open main menu.
is available in the server to download.
17. Zoom: Activate / deactivate 2x digital zoom.
9. Mute Icon: Indicates audio is off on the monitor.
Tap the zoom icon and then tap the desired
viewing area on the screen (must be in single-
channel view).
Side Panel Buttons:
Power button / Enter Scan mode (display turns on only when
motion is detected).
Raise or lower the volume.
Press and hold to activate intercom (two-way audio).
It' s all on the Web
Need to extend the wireless range?
Visit www.lorextechnology.com
for further details.
FOR SUPPORT AND INFORMATION,
VISIT WWW.LOREXTECHNOLOGY.COM
www.lorextechnology.com
D. Setting the Date & Time
1. Tap
on the lower right corner of the screen to open
the main menu.
2. Go to General Settings > System Settings >
Date & Time.
E. Smartphone / Tablet Setup
iPhone® / iPad®
Connect the included Ethernet cable from the Ethernet port on the
1
LCD receiver to your wireless router. The network icon turns green.
NOTE: You may need to turn the receiver off and on again.
Download the free Lorex SD Pro app from the App Store. Once installed,
2
tap
to launch the app.
3
Tap Add Device.
Tap QRCode to scan the QR
4
code on the back of the receiver.
OR
Tap Add to enter the UID manually.
5
Enter the following:
Enter a personalized name for the system.
Enter the UID printed below the QR code on the back
of the receiver. If you tapped QRCode in Step 4, this
field populates automatically.
Enter the password (default: 000000).
6
Tap Save. The system will show in your device list with an Online status.
7
Tap the name of the system. You will be asked to enter a new, secure password.
Write your password down for future reference: __________________________________________
Congratulations! You are now connected to your surveillance system over the Internet.
View live video from your camera(s) in portrait or landscape mode.
©2015 Lorex Technology Inc.
As our product is subject to continuous improvement, Lorex Technology &
subsidiaries reserve the right to modify product design, specifications, prices &
warranty without notice and without incurring any obligation. E&OE
NOTE: It is important to set the date and time to ensure that they are properly captured on recordings.
3. Tap each value to move the cursor; tap the up arrow icon
the down arrow icon
to change the year, month, day, hour, and
minutes.
NOTE: The system uses a 24-hour clock.
NOTE: Be sure to leave the receiver connected to a power outlet to ensure remote connectivity.
Connect the included Ethernet cable from the Ethernet port on the
1
LCD receiver to your wireless router. The network icon turns green.
NOTE: You may need to turn the receiver off and on again.
Download the free Lorex SD Pro app from the Google Play Store. Once
2
installed, tap
to launch the app.
3
4
Enter the following:
5
7
Tap OK. The system will show in your device list with an Online status.
Tap OK. The system will show in your device list with an Online status.
8
6
Tap the name of the system. You will be asked to enter a new, secure password.
4. Tap the Home icon
to save your
or
settings.
NOTE: See the user's guide for details on
configuring Daylight Savings Time and
Network Time Protocol.
Android™
Tap Click here to add device.
Enter the UID printed below the QR code.
OR
Tap Scan to scan the QR code on the
back of the receiver.
Enter a personalized name for the system.
Enter the password (default: 000000).
LW2770_SERIES_QSG_EN_R1
Advertisement
