Repeat; Selection Of Units; Key Lock; Safety Instructions - Caretec HappyDay User Manual

4.4.2
HappyDay can repeat the weighing result up to three times. Enter the
menu by pressing the circle key. Then move to the repeat function by
pressing the plus or the minus key. Press the circle key long to enter the
function. Choose with the plus and the minus key from 1 to 3
announcements for the weighing result. Press the middle key long to save
the settings and to exit the menu. The saved setting are repeated to
confirm your choice. (Factory default settings are 3 repetitions).
4.4.3
HappyDay is available in several languages. In countries where the metric
system is not standard, the units can be change to Pound or Stone. To
change the measuring units, enter the menu by pressing the circle key.
Then move to the units setup by pressing the plus or the minus key. Enter
the function with a long press of the circle key. Choose your desired unit of
weight with the plus and the minus key. Press the circle key long to save
the setting and to exit the menu. The chosen unit of weight is announced.
4.5

Key lock

To activate the key lock simultaneously press and hold the two volume
keys. You will hear "keys locked". To release the key lock, press and hold
the two volume keys again until you hear: "keys unlocked".
5.

Safety instructions

 Do not expose the device to extremely high humidity, intemperately
high or low temperatures or any dust or dirt.
The operating temperature of the device lies between +5 and +35 °C
(+41 to +95 °F). If any liquid enters the device, remove the batteries,
wipe the case dry with a cloth and let the device dry completely.
 Place the device on a horizontal, stable and non-slippery surface, such
as the tiled bathroom floor.

Repeat

Selection of units

Indication: The key lock can also be deactivated by
taking out the batteries or removing the power
supply.
8