Asus Motherboard DSBV-D User Manual page 102

Scroll down to display more items:
Advanced
CPU1 Domain 0 Target Temperature
CPU1 Domain 1 Target Temperature
CPU2 Domain 0 Target Temperature
CPU2 Domain 1 Target Temperature
SYSTEM1 Target Temperature
SYSTEM2 Target Temperature
FBD_FAN1 Speed
VCORE0 Voltage
VCORE1 Voltage
VTT
+1.5V
+1.8V
+3V
+12V
+5V
+5VSB
VBAT
F1 Help
ESC Exit
CPU1/2 Domain 0/1 Temperature, SYSTEM1/2 Temperature,
CPU_FAN1/2 Speed, FRN_FAN1/2/3/4 Speed, REAR_FAN1/2 Speed
These fields show the auto-detected values and are not user-configurable. If no fan
is installed, the field shows 0 RPM.
Smart Fan Control [Smart Fan II]
Allows you to disable or configure the Smart Fan feature.
Configuration options: [Disabled] [Smart Fan] [Smart Fan II]
CPU1/2 Domain 0/1 Target Temperature
Allows you to set the target CPU temperature at which the CPU fan will start
running if the fan is not yet turned on.
Configuration options: [54]~[76]
SYSTEM1/2 Target Temperature
Allows you to set the target sytem temperature at which the system fan will start
running if the fan is not yet turned on.
Configuration options: [39]~[60]
FBD_FAN1 Speed, VCORE0/1 Voltage, VTT, +1.5V, +1.8V, +3V, +12V,
+5V, +5VSB, VBAT
These fields show the auto-detected values and are not user-configurable.
4-34
PhoenixBIOS Setup Utility
Hardware Monitor
Select Item
↑↓
Select Menu
→←
[075]
[075]
[075]
[075]
[060ºC]
[060ºC]
N/A
1.25 V
1.25 V
1.21 V
1.56 V
1.79 V
3.28 V
11.91 V
4.87 V
4.96 V
3.10 V
-/+ Change Values
Enter Select Sub-Menu
Item Specific Help
Full fan speed will
be started when the
temperature reaches the
selected target value.
F9 Setup Defaults
F10 Save and Exit
Chapter 4: BIOS setup