Advertisement
Quick Links
Advertisement
Summary of Contents for Benedict Audio HotHead phono M
- Page 1 audio...
- Page 3 Benedict Audio Introduction The HotHead phono M is a stand alone phono stage for use with moving magnet and high output moving coil phono cartridges. It applies suitable amplification and equalisation for the output to be fed into the Aux or Line input of a pre or integrated amplifier.
- Page 4 Accidentally using this adaptor in equipment other than the HotHead phono M may cause serious damage and / or hazard. Care must be take that this adaptor is only used in HotHead phono M. Benedict Audio cannot be held liable for any damages arising from any mis-use of this power adaptor.
- Page 5 Connect the power adaptor to the power socket and apply power. The amber power LED on the front panel will light. As it is recommended to keep HotHead phono M powered at all time there is no On / Off switch provided.
-
Page 6: Specifications
Specifications Gain 42 dB 81 dB CCIR unweighted THD+N 0.045% Channel balance 0.01 dB Channel separation 77 dB RIAA error +/- 0.1 dB Max input 65 mV Frequency response 5 Hz – 235 kHz ( -3 dB, RIAA adjusted) Phase Non –... - Page 8 Designed and made with love in England by benedict audio limited Basepoint Business Centre 15 Jubilee Close Weymouth Dorset DT4 7BS England email: support@benedictaudio.com...