Usb Configuration - Asus Motherboard A8V-MX User Manual

PCIE Frequency (MHz) [Auto] PCIE Frequency (MHz) [Auto] PCIE Frequency (MHz) [Auto] PCIE Frequency (MHz) [Auto] PCIE Frequency (MHz) [Auto]
Sets the PCI Express frequency.
Configuration options: [Auto] [Fixed Clock]
2.4.2 2.4.2

USB Configuration

USB Configuration
2.4.2 2.4.2 2.4.2 USB Configuration USB Configuration USB Configuration
Advanced
USB Configuration
Module Version - 2.24.0-10.4
USB Devices Enabled:
USB 1.1 Ports Configuration
USB 2.0 Ports Enable
Legacy USB Support
Port 64/60 Emulation
USB 2.0 Controller Mode
BIOS EHCI Hand-Off
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.
The Module Version and USB Devices Enabled items show the
auto-detected values. If no USB device is detected, the item shows
None.
USB 1.1 Ports Configuration [USB 8 Ports] USB 1.1 Ports Configuration [USB 8 Ports] USB 1.1 Ports Configuration [USB 8 Ports] USB 1.1 Ports Configuration [USB 8 Ports] USB 1.1 Ports Configuration [USB 8 Ports]
Allows you to choose the number of USB 1.1 ports to enable. Setting to
[Disabled] disables the USB 1.1 host controllers.
Configuration options: [Disabled] [USB 2 ports] [USB 4 ports]
[USB 6 ports] [USB 8 ports]
USB 2.0 Ports Enable [Enable] USB 2.0 Ports Enable [Enable] USB 2.0 Ports Enable [Enable] USB 2.0 Ports Enable [Enable] USB 2.0 Ports Enable [Enable]
Allows you to enable or disable the USB 2.0 host controllers.
Configuration options: [Disabled] [Enabled]
Legacy USB Support [Auto] Legacy USB Support [Auto] Legacy USB Support [Auto]
Legacy USB Support [Auto] Legacy USB Support [Auto]
Allows you to enable or disable support for USB devices on legacy
operating systems (OS). Setting to Auto allows the system to detect the
presence of USB devices at startup. If detected, the USB controller legacy
mode is enabled. If no USB device is detected, the legacy USB support is
disabled. Configuration options: [Disabled] [Enabled] [Auto]
2 - 1 8 2 - 1 8 2 - 1 8
2 - 1 8 2 - 1 8
BIOS SETUP UTILITY
None
[USB 8 Ports]
[Enable]
[Auto]
[Disabled]
[HiSpeed]
[Enabled]
Enables 1.1 USB host
controllers.
Select Screen
Select Item
+-
Change Option
F1 General Help
F10 Save and Exit
ESC Exit
C h a p t e r 2 : B I O S s e t u p C h a p t e r 2 : B I O S s e t u p C h a p t e r 2 : B I O S s e t u p
C h a p t e r 2 : B I O S s e t u p C h a p t e r 2 : B I O S s e t u p