Travel/Home Modes - Midland HH54 User Manual

A Single S.A.M.E. County Code:
1. Press the MENU button to open menu options.
2. Press the UP arrow to scroll through menu
options until "S.A.M.E. SET" is displayed, then
press SELECT button.
3. Press the UP arrow to scroll through:"SINGLE",
"MULTIPLE", or "ANY."
4. Display "SINGLE", then press the SELECT button.
"S.A.M.E.01"will be displayed. (Note if you are
programming a single S.A.M.E. County Code,
only the "01" setting will be used.) Press SELECT.
5. Using the UP arrow, find the first digit of your
S.A.M.E. County Code. Press the RIGHT arrow
to save the digit and automatically advance to the
next digit.
6. Program all digits of your S.A.M.E. County Code in
the same way.
7. Press the SELECT button to store your S.A.M.E.
County Code. Press the MENU button to close
the programming menu.
Multiple S.A.M.E. County Codes:
1. Press the MENU button to open menu options.
2. Press the UP arrow to scroll through menu
options until "S.A.M.E. SET" is displayed, then
press the SELECT button.
3. Press the UP arrow to scroll through:"SINGLE",
"MULTIPLE", or "ANY."
4. Display "MULTIPLE" as explained, then press
SELECT. "S.A.M.E.01" will be displayed, indicating
you will be programming your first S.A.M.E.
County Code at weather radio menu location
"01."
5. After programming your first S.A.M.E. County
Code, press the SELECT button then the
"UP" arrow to advance to "S.A.M.E. 02."
Program all of your S.A.M.E. County
Codes in the same way as above.
6. When finished entering all your codes,
press the MENU button to close the
programming menu.
Helpful Tip:The S.A.M.E. code is created using the
• The first digit is the sub county code-currently 0 in most
travel mode, making it easy to take the radio from home
onto a road trip or vacation without having to reprogram
your settings Here are the basic differences between
travel and home mode:
Home Mode: In this mode the radio uses your default
settings for response location. So, if you have chosen mul-
tiple S.A.M.E counties and programmed in three,
these will be the counties the radio will alert for. In
addition your channel selected during the quick start
set-up will be saved as a home default as well, unless you
manually change it through the menu while in home mode.
When you switch to travel mode, these settings will be
saved for when you return back to home mode.
Travel Mode: In this mode the radio automatically scans
to the first available weather channel with a broadcast
signal strong enough to use. If later the signal becomes too
weak to use the radio will automatically resume scanning
to find a usable signal.
www.midlandradio.com
following method:
areas.
• The second two digits represent the state code.
• The last three digits represent the county code.

Travel/Home Modes

The HH54 gives you the option of home or
5