Advertisement
Quick Links
Users Manual & Operation Guide
Thank for your purchase of an A3 Thermal-Copier. This guide is for Series A3AU models, indicated by
A3AU-0000 to A3AU-9999 serial numbers.
This manual introduces security advice, hints for installation and operation, as well as maintenance
information. Before using the machine, please read all areas of this manual to ensure correct set-up, care
and importantly to avoid risks for your health and/ or damage to the machine by improper use.
This symbol indicates an important hint for your safety.
Disregarding this subject may cause physical harm to you or damage to the machine.
Warranty
Each Thermal-Copier has passed several tests (function, operation, electrical) during/ after manufacture.
The Warranty Agreement supplied with purchase of the machine covers the warranty period and warranty
terms for this model.
Contents
Page
Contents
2
Electrical Safety Advice
3
Unpacking Instructions and Machine Location
4
LED Display
5
Artwork Types & Preparation
6
Imaging RISO ScreenMaster Mesh
7
Imaging Oversized Screens - A3 designs on A2 size mesh
9
Cleaning
9
Trouble Shooting
Sales, Supplies and Support
Please contact your place of purchase for supplies of carriers and additional materials:
Phone:(02) 9979 9700
Supplies and Orders - www.nehoc.com.au/shop
Machine support - www.nehoc.com.au/go/tca3
Fax: (02) 9979 9201
Postal: PO Box 175, NARRABEEN NSW 2101
1
NTCA3 A3 Thermal-Copier Manual (V8.118)
E-mail: support@nehoc.com.au
© 2008 NEHOC Australia Pty Ltd
Advertisement
Summary of Contents for Nehoc TCA3-SP
- Page 1 Please contact your place of purchase for supplies of carriers and additional materials: Supplies and Orders - www.nehoc.com.au/shop Machine support - www.nehoc.com.au/go/tca3 Phone:(02) 9979 9700 Fax: (02) 9979 9201 E-mail: support@nehoc.com.au Postal: PO Box 175, NARRABEEN NSW 2101 © 2008 NEHOC Australia Pty Ltd...
- Page 2 This manual may not be reproduced or edited without written permission from NEHOC Australia Pty Ltd. This manual is intended to be used as a guide only, NEHOC Australia Pty Ltd may not be held responsible for any fault or misinterpretation that may occur from its use by the customer.
-
Page 3: Machine Location
Turn the machine on (Green light will illuminate), press Feed Button ( 3) to rotate Glass Roller With locks loose, rubber removed and the Glass Roller rotated your machine is now unlocked and ready for use. © 2008 NEHOC Australia Pty Ltd... -
Page 4: Led Display
8 of this manual for further details. Never turn off the power or remove the AC power plug unless the fans have stopped and the machine has fi nished its cool down period (approx. 30 minutes) after use. © 2008 NEHOC Australia Pty Ltd... - Page 5 Reuse will transfer carbon back to the paper 9. Artwork is now prepared and ready to image a screen. • If artwork is not used within 5 minutes repeat this process as the paper will begin to absorb moisture © 2008 NEHOC Australia Pty Ltd...
- Page 6 Adjust the imaging setting if required. With your screen now imaged you are ready to mount your screen to a frame for printing. © 2008 NEHOC Australia Pty Ltd...
- Page 7 • Maximum length of mesh outside the carrier is 100mm • For longer designs, fold and tape both the head and base of the mesh to the back of the artwork (all 4 sides). © 2008 NEHOC Australia Pty Ltd...
- Page 8 If re-imaging is required you must reattach the side and head to the artwork (steps 4-7) before running through the machine After checking your screen remove the fi nal piece of tape from the back of the artwork. Remove the artwork from the design © 2008 NEHOC Australia Pty Ltd...
-
Page 9: Troubleshooting
If the issue can not be fi xed, they will contact the Priority Service Depart- ment directly and a Service Technician will contact you using the details provided on your warranty registration for machine service/ repair. © 2008 NEHOC Australia Pty Ltd...