www.DataSheet4U.com
2. Remove the two Phillips PM2.5×5.0 screws 1 that secure the
audio board to the computer.
3. Slide the audio board 2 back to disengage the audio
connectors from the base enclosure.
4. Remove the audio board 3.
5. Disconnect the audio board cable 4 from the audio board.
Removing the Audio Board
Reverse the above procedure to install the audio board.
Maintenance and Service Guide
Removal and Replacement Procedures
5–53
Need help?
Do you have a question about the Pavilion dv6000 and is the answer not in the manual?