Subscribe to Our Youtube Channel
Related Manuals for Alfa Plam Lara
Summary of Contents for Alfa Plam Lara
- Page 1 SOLID FUEL FURNACE LARA FURNACE INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS...
- Page 2 INSTALLATION LIABILITY ALFA PLAM may not be held liable for any installation work, the liability for which will be borne by the person who installed the furnace and who was requested to inspect the chimney and air suction and the state of repair of installed elements.
- Page 3 MAIN PARTS 1. Flue pipe collar 2. Secondary air inlet 3. Firebox door 4. Grate shaker handle 5. Ash pan door 6. Primary air regulator Fig. 1 GENERAL RULES The furnace will draw perfectly if the chimney is cleaned and free of obstructions and sharp edges. In the event of displacement of the axis, there must be a slope of not more than 45º...
- Page 4 If the furnace draws insufficiently when starting the fire for the first time, check whether the chimney is blocked with pieces of mortar, bird’s nests etc. Additionally, furnace and flue pipe connection must be properly set, according to instructions and without clogging any elements and it must be properly sealed. If the furnace draws insufficiently after a longer period of normal operation, the chimney should be checked and cleaned (if this could not be done before the furnace was installed).
- Page 5 ADJUSTING COMBUSTION Primary combustion is developed when air enters the furnace, which is adjusted using primary air regulator located at the front of the ash pan door (Fig. 2). If you need faster combustion, turn the primary air regulator RIGHT (all apertures opened) and if you want to slow down combustion, turn the primary air regulator LEFT (all apertures partially closed).
- Page 6 HANDLING AND TRANSPORT INFORMATION When relocating the furnace, special care should be taken to keep the furnace balanced and therefore avoid sudden moves. Before moving the furnace in any way, check the forklift’s capacity to carry the weight of the furnace: operator will be responsible for lifting the weight.
Need help?
Do you have a question about the Lara and is the answer not in the manual?
Questions and answers