Table of Contents
Advertisement
HOW TO USE
4
After verifying that everything has been connected properly, plug the power cord into an available AC wall outlet.
On the control module, set the controls as follows:
• Rotate the Volume
• Press the 3D
• Turn the Bass
5
To start making music, adjust the controls as follows:
•
Start your music, CD-ROM, movie, or other sound source playing and turn up its output level, if available.
•
Rotate the V V olume
olume control clockwise to the desired listening level.
•
Adjust the Balance
Balance control left and right to audibly check your connections.
•
Rotate the Bass
Bass and Treble
•
For private listening, use the headphone jack locacted on the CM-4 control module.
Make sure to experiment with all of the controls to customize the sound just the way you like it. If you have any
•
questions, look to our troubleshooting
•
For further support e-mail us at tech@midiland.com or call Customer Service at (888) 592-1168.
6 6
Volume control fully couterclockwise.
3D and Mute
Mute buttons so that they are in the out position, not "engaged".
Treble, and Balance
Balance to the center detent position, "12 o'clock".
Bass, Treble
1. Push the S4 logo power switch located on the front
2. The S4 MidiLand logo LED should illuminate.
Treble left and right. You should noticably hear an increase or decrease in tone.
troubleshooting section.
Power switch
the subwoofer.
Advertisement
Table of Contents
