Download Print this page

Advertisement

Quick Links

Please read the users' manual before
use it.
Brief Introduction
i.onik
PB-5000 is a high capacity
®
backup power pack which is especially
designed for mobiles, tablets and other
digital products. With built-in iPod 30
pin and micro charging cable, it's able
to charge two mobiles simultaneously.
Fashionable LED power screen shows
power level anytime. i.onik
PB-5000
®
could provide extra power whenever
your devices need and wherever you
may be. This is i.onik
PB-5000, your
®
best charging assistant, your best
friend.
2
1) Main
2) iPod output
3) Power switch
4) Power indicator
5) Micro output
6) Micro input
Cable disassembling
Please pull out iPhone and micro
connector by fingernail.
3
Instruction
1. How to charge built-in battery of
i.onik
PB-5000
®
Connect micro USB cable with i.onik
®
PB-5000 and PC (or USB charger),
i.onik
PB-5000 gets charged automa-
®
tically. Power indicators come on when
charging and all lights are flashing
when fully charged.
Notice:
1) Please use provided micro USB cable
or branded cable to charge i.onik
PB-
®
5000.
2) Please disconnect charging cable
after fully charged otherwise it might
reduce battery's life.
3) Do not use any defective chargers.
4) Do not put this product into or near
fire to avoid explosion.
5) Please hold the product and get out
plug of cable by fingernail, please do
not pull cable directly.
4
2. How to check power level of
built-in battery
Gently press power switch to turn on
power indicator's screen, each light
accounts for 25 % power, 4 lights come
on stands for full power. To save power,
indicators screen turns off automatically
within 5 sec.
3. How to use i.onik
®
PB-5000 to
charge your devices (refer to
picture on the right)
Connect your devices to built-in iPod
30 pin or micro cable (available to charge
two devices together), keep pressing
power switch for 1 sec to turn it on (the
same way to turn it off). LED indicator
comes on when power switch was
pressed and turn off within 5 sec to
save power. To avoid over-charge,
i.onik
PB-5000 turns off automatically
®
when your devices have been fully
charged.
5
Notice:
1) Not used for a long time or use for
first time, you are suggested to use
provided cable.
2) Keep i.onik
PB-5000 at a place
®
where air flows while charging.
Product features
• Standard USB input, compatible for
all USB chargers.
• Available to charge two devices
simultaneously.
• Built-in battery with 5000 mAh high
capacity.
• Fashionable LED power screen.
• Multi-functional design makes i.onik
®
PB-5000 easy to carry and convenient
to use.
• High charging efficiency make it 92 %
at least.
6

Advertisement

loading

Summary of Contents for i-onik PB-5000

  • Page 1 5) Micro output Connect micro USB cable with i.onik accounts for 25 % power, 4 lights come ® 6) Micro input PB-5000 and PC (or USB charger), on stands for full power. To save power, i.onik PB-5000 is a high capacity i.onik...
  • Page 2 Specifications Accessories Care and Maintenance 5) Do not drop, knock or shake the device. Rough handling can break its PB-5000 Optional accessories Standard accessories Your device is a product of superior sophisticated structure. Battery type: Li-thium Powerbank design and craftsmanship and should...

This manual is also suitable for:

Pb-3000