Advertisement
Quick Links
Advertisement
Related Manuals for KERN DB 1700 N
Summary of Contents for KERN DB 1700 N
- Page 1 Operation manual DB 1700 N Operating Instructions……....1- 10...
-
Page 2: Important Instructions
During work you should wear goggles, ear protectors, protective gloves, and sturdy work clothes! Use ear protection Wear safety goggles Wear a helmet Use protective gloves Wear protective boots Specifications Diamond Core Drill DB 1700 N Nominal voltage 110 V AC Power drain 1.700 W Order No. Frequency: 40-60 Hz Max. - Page 3 GARDENA connector and instruction manual in transport case. Application for Indented Purpose The diamond core drill DB 1700 N is indented only for professional use and may be used only by instructed personnel. It may be used either with or without a suitable diamond drill rig. For wet drilling jobs with diameters above 80 mm and drilling in the 1 gear, it is a must to use a suitable drill rig.
- Page 4 Electrical Connection The DB 1700 N is designed according to protective class II. For the user’s safety, the tool may be operated only with a leakage current protector. That is why the tool includes an integrated PRCD protective switch in an earth contact socket.
- Page 5 Attention! Use the arrestor button only during operation with drill rig. Its use during manual operation is not allowed. If the machine stops for any reason or due to power failure, immediately release the arrestor button by pressing the ON/OFF switch. If this button is not released, the tool may unintendedly restart if the PRCD protective switch is operated and cause a danger to the user.
- Page 6 Overload Protection To protect the user, motor and drill bit, the DB 1700 N is equipped with a mechanical, electrical and thermal overload protection. Mechanical: In case of sudden jamming of the drill bit, the drilling spindle is unclutched from the motor by means of a slip clutch.
- Page 7 Care and Maintenance Before the beginning of the maintenance- or repair works you have to disconnect plug from the mains. It is a must to unplug the tool before starting any service or repair works. Repairs may be executed only by appropriately qualified and experienced personnel. After every repair, the unit has to be checked by an electrical specialist.
- Page 8 On sole responsibility we declare that this product is in conformity with the following standards and standard documents: EN 60 745, EN 55 014, EN 61 000, according to the regulations 2006/95/EC, 89/336/EEC, 98/37/EC Your Distributor: KERN-DEUDIAM GmbH Industriestr. 24 33161 Hövelhof Germany Tel: +49 5257 – 507 - 0 Fax: +49 5257 –...