iBall Airway 14.4GW-01 User Manual

14.4GW - 01

User Manual

Ver: 1.0.0
Overview
iBall Airway 14.4GW- 01 is designed to enable users with access to High Speed Internet via HSPA/
UMTS/ EDGE/ GPRS Networks which offers a maximum data transfer rate upto 14.4Mbps (HSDPA) &
5.76Mbps (HSUPA).
Plug-N-Surf: Allows users to install data card easily through web GUI.
1.1 Installation Steps:
1. Modem Cap
2. Front Cover
3. USB Connector
4. SIM card slot
5. MicroSD card slot
1.2 Hardware Installation
1. Press and push the front cover and remove it.
Note:
Do not open the front cover rudely so as to avoid the damage of the front cover.
2. Insert the SIM card into the SIM card slot.
Insert the SIM card with the metal contact area facing downwards into the slot, and
then push SIM card as far as possible, shown as the following picture.
3. Insert the MicroSD card into the MicroSD card slot.
Note:
This modem only supports MicroSD card.
Insert your MicroSD card into the MicroSD card slot, shown as the following picture.
4. Put the front cover flatly upon the body of modem and push the front cover to
lock the cover in its place.
5. Connect the Modem to your laptop or desktop PC.
Plug the USB connector into your computer's USB port and make sure that it is tightly inserted.

O.S automatically detects and recognizes new hardware and starts the installation wizard.
