Connecting To Shore Power - Meridian 459 Owner's Manual

459 Motoryacht • Owner's Manual
• This yacht is equipped with two 30 amp/110-volt shore power inlets or one 50-amp/220-volt shore power inlet.
• The 30-amp/110-volt shore power inlets provide 30-amp/110-volt power to each shore power master breaker.
• The 50-amp/220-volt shore power inlet provides 50-amp/110-volt power to both shore power master breakers.

Connecting To Shore Power

SHOCK & ELECTRICAL SYSTEM DAMAGE HAZARD!
• Monitor the polarity indicator lights EVERY TIME you connect to shore power.
• If a reversed polarity light turns on when you are connecting to shore power, do NOT turn
on the main breaker switches.
• Instead, IMMEDIATELY unplug the shore power cord (ALWAYS from the dockside outlet
first) and alert marina management.
1. Review all hazard information at
the beginning of this section,
Shore Power.
2. Turn Off all breakers and
switches on the AC master panel.
3. Attach the shore power cord(s) to
the yacht inlet(s) first, then to the
dockside outlet(s).
4. Switch the "SHORE POWER 1
and/or SHORE POWER 2 " mas-
ter breakers On.
5. Turn On the individual compo-
nent breakers and line breakers
as required.
! WARNING!
TYPICAL SHORE
POWER INLET
Chapter 11: Electrical System
77