Download Print this page

iSP HDA 1003 Owner's Manual

Table of Contents

Need help?

Do you have a question about the HDA 1003 and is the answer not in the manual?

Page 2 If this warning is ignored a serious electrical shock or death may occur.  Do not attempt to service this unit. No user serviceable parts inside. Refer servicing to qualified, ISP approved service personnel.  Never remove or defeat the ground connection on the power cord of this unit.
Page 3 D-CAT amp technology that can be found in any of the ISP Technologies active speaker systems. This system contains an internal order crossover. Delivering 1000 watts of power. You can now get the same great...
Page 4 2. Powercon Connector Jack – This module provides a connection for the power cord. 3. Speakon Connector Jack – Connect to any ISP corresponding balanced speakon input. 4. Level Control Knob - This control determines the overall input level of the signal.
Page 5 BALANCED CONNECTION DESCRIPTION The ISP remote Sub Amplifier has a balanced XLR input and two outputs configured to AES standards (Audio Engineering Society). These connections are connected in a loop through configuration from the inputs to the full range outputs and will accept a balanced line-level input.
Page 6 Any damage resulting from the misuse or the failure to follow the precautions and instructions will void the warranty. In the event that the unit needs to be repaired, please return the unit to ISP Technologies directly. Simply repack the unit, send a copy of the original receipt, a...