Table of Contents
Advertisement
5-2. Updating firmware on Mac OS X
The FR1 Utility for Mac OS X doesn't need installation. You can directly
launch it from CD-ROM. Before using this utility, it must be enabled.
Caution: If the utility is enabled, all the firewire devices connected to
the system WILL NOT WORK temporally. If the MacOS X is booted
from firewire hard drive, do not enable the FR1 Utility.
1. Click Enable FR1 Utility button
and restart the system.
2. Click a small button at the left of
Select firmware data. Specify the
firmware data on the next window
and click Open.
3. Click Start Firmware update but-
ton.
38
Advertisement
Table of Contents
