Table of Contents
Advertisement
Pan/Tilt IP Camera
Seeing the video in a remote location
After the IP CAM is installed and you can see the video from the CamView
software in the local network, it's very easy to see the video in a remote location. All
you need to do is add a camera item in the "CameraList" folder of the CamView
software, key in the IP CAM ID and Password(from the ID/Password card). And then
double click this camera item. You will then see the Camera video immediately. No
further NAT/router setting modifications are needed.
Figure 2-7: Running window of CamView program
Figure 2-8: Pop-up play-video password window
12
Advertisement
Table of Contents
