Crosley ANIMATED CONCERTINA Instruction Booklet

I. Operation
1. Place the unit on any flat surface.
2. Insert the AC adaptor plug into the power jack and plug the AC adaptor into a nearby working outlet as shown in (FIG.II).
3. Turn the power switch at the rear to the "ON" position (See FIG.II). The unit will start to play music.
4. Turn the volume control to adjust the loudness of the music (See FIG.II).
5. Turn the power switch to the "OFF" position when the unit is not in use.
6. To select a new song:
Turn the ALPHABETIC POINTER and the NUMBER POINTER to the position of the chosen
song number. For example, if song no.C3 is selected, turn the ALPHABETIC POINTER to the
"C" position and the NUMBER POINTER to the "3" position (See FIG.III).
7. Your ANIMATED CONCERTINA plays 25 Christmas Carols and 25 all time classics for
year-round use. The first song starts at the song number where the ALPHABETIC POINTER
and the NUMBER POINTER are positioned. The sequential song will play next and
then play is continuous.
FIG.I
II. Trouble Shooting
Your ANIMATED CONCERTINA has been designed to give many seasons of trouble-free operation. In the event that a problem does
occur, please refer to the following chart for suggest solutions.
Problem
No music or motion
Selected song does not play
WARNING: DO NOT PLACE THE UNIT IN DIRECT SUNLIGHT OR NEAR HEAT SOURCES SUCH AS RADIATORS, HEAT REGISTERS
STOVES, OR OTHER APPLICANCES (INCLUDING TELEVISIONS AND STEROS) THAT PRODUCE HEAT.
THIS PRODUCT CONTAINS SMALL PARTS WHICH COULD CAUSE CHOKING IF SWALLOWED.
CAUTION: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DO NOT MOVE
COVER. NO USER SERVICABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ANIMATED CONCERTINA
THIS PRECISION SET IS NOT A TOY!
Please read this entire instruction booklet
Likely Causes
No power
The power switch is "OFF"
Unit needs restarted
THIS IS NOT A TOY
FIG.II
Solution
Make sure the AC adaptor is plugged into a working outlet.
Check to see that the AC adaptor plug is securely inserted
into the power jack.
Turn the power switch to the "ON" position.
Turn the power switch to "OFF" and then to "ON".
FIG.III