Asus A7V266-EX User Manual page 20

3. HARDWARE SETUP
3) Voltage Over Setting (OVER1, OVER2)
This jumper opens or closes the circuit to control the use of voltage increases to
enhance CPU performance. The default setting, [2-3] disables the use of "over-
voltage" increases. Switch the jumper cap to [1-2] before attempting changes
with the VID jumpers. NOTE: It is not recommended to use this feature unless
confident that the CPU will not be damaged.
A7V266-EX
A7V266-EX OVER Voltage Selection
4) Voltage Regulator Output Setting (VID1, VID2, VID3, VID4)
This jumpers allow you to manually adjust the CPU core voltage. It is
recommended to use CPU Default as the CPU core voltage. CPU Default, all
jumpers [2-3], means the Vcore is generated according to the CPU VID
configuration. For each jumper setting, there are two voltage options,
depending on the CPU used.
A7V266-EX
A7V266-EX CPU Core Voltage
Selection
20
1 2
OVER Voltage
ENABLE
R
VID4
VID3
VID2
VID1
VID4
VID3
R
VID2
VID1
ASUS A7V266-EX User's Manual
OVER2
OVER1
2 3
OVER Voltage
DISABLE
(Default)
1 2 3
1 2 3
1.8/1.775Volts
1.85/1.825Volts
1 2 3 1 2 3
1.75/1.725Volts 1.7/1.675Volts