1. Manuals
  2. Brands
  3. Serious RED Manuals
  4. Lawn Mower
  5. 52K650Z
  6. Operator's manual

Serious RED 52K650Z Operator's Manual

Z series
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
52 K6 5 0 Z
OPERATORS
MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 52K650Z and is the answer not in the manual?

Questions and answers

Summary of Contents for Serious RED 52K650Z

  • Page 1 52 K6 5 0 Z OPERATORS MANUAL...
  • Page 2 ENCORE Your mower is only as safe as the Handle gasoline carefully. Use an approved gasoline container. Fill the fuel tank, to within 1" operator! from the neck, with good quality unleaded gaso- Operator carelessness or error may result line. in serious bodily injury.
  • Page 3 ASSEMBLY INSTRUCTIONS for 42B350Z ; 42K450Z ; 48B450Z ; Assemble the unit as instructed by the As- 48K550Z ; 52B550Z ; 52K650Z. sembly Instructions. After fueling and oiling the engine, hook up Remove unit from crate, taking care to re- the battery.

  • Page 4: Starting Engine

    ENCORE 4. Take the 4 – 5/16 X 3/4 HHCS and when engine starts. Ignition switch is spring 4 – Lock Washers and fasten seat to the loaded and will return to run position auto- seat plate. matically. 5. Take the remaining bolts and whizlocks Slowly return choke to run position once the nuts and bolt control levers onto the engine has started.

  • Page 5: Mowing Speed

    42K450Z ; 48B450Z ; 48K550Z ; most efficiently at maximum blade speeds. The running speed of the machine should 52B550Z ; 52K650Z. allow the mower blades to maintain this Change the hydraulic system filter and reser- maximum speed while mowing across turf.

  • Page 6: Tire Pressure

    ENCORE Follow the installation instructions printed on corrosive and over filling can cause damage the filter. Use only a high quality 20W50 to surrounding metal parts. Battery should be rated engine oil. NOTE: Refer to the engine maintained at 1.265 gravity charge. When manual for engine lubrication recommen- replacing battery after servicing, take care to dations.
  • Page 7 Remove key from the ignition switch. The 42K450Z ; 48B450Z ; 48K550Z ; deck drive belt, which may be accessed by 52B550Z ; 52K650Z. removing the deck plate, (see fig.1) has a The following recommendations on lubrica- turnbuckle assembly to adjust spring tension.

  • Page 8: Drive Adjustments

    ENCORE TRACKING for 42B350Z ; 42K450Z ; 48B450Z ; 48K550Z ; 52B550Z ; 52K650Z. 5/32 HEX 1. Return the wheels to the ground and drive the mower to check tracking at low and full speed. ADJUSTABLE PUMP LINK 2. If the pumps are properly neutralized,...
  • Page 9 (fig. 3). DECK HEIGHT ADJUSTMENT for 42B350Z ; 42K450Z ; 48B450Z ; 48K550Z ; 52B550Z ; 52K650Z. The cutting height can be adjusted from 2 to 5 inches in approximately 1/4 inch incre- ments. The height may be selected by simply moving the deck height adjustment lever to FIG.

  • Page 10: Charging System

    ENCORE CAUTION: Mower blades are sharp and can cut you during blade maintenance or adjustment. Use suitable covering over cutting edges of blades to prevent bodily harm. To obtain optimum mowing results, mower blades should be kept sharp and well bal- anced.
  • Page 11 ENCORE...
  • Page 12 ENCORE...
  • Page 13 ENCORE...
  • Page 14 ENCORE BDP-10L VARIABLE PUMP – SUPPORT SYSTEM TRANSMISSION HYDRAULIC SUPPORT SYSTEM The charge pump incorporated into the BDP- Since either of the main hydraulic passages 10L units supplies fluid to keep the closed can be at high pressure, two (2) charge check loop charged, preventing cavitations and valves are used to direct make-up fluid into providing cooling oil flow for the system.
  • Page 15 ENCORE CONTROLS AND FEATURES - BDP-10L VARIABLE PUMP Direct Displacement Control The direct-proportional displacement control (DDC) provides a simple method of control. Movement of the swashplate control shaft produces a proportional swashplate movement and change in pump flow and/or direction. If difficulties are encountered with the control, inspect the connection of the control linkage to the swashplate control shaft to insure that...
  • Page 16 ENCORE START UP MAINTENACE - BDP-10L VARIABLE PUMP Fluids prior to start-up. Check inlet line for properly tightened fittings and make sure it is free of Fluids used with Hydro-Gear product should restrictions and air leaks. be carefully selected with assistance from a reputable supplier.

  • Page 17: Maintenance

    ENCORE Maintenance Check the reservoir daily for proper fluid level, the presence of water (noted by a cloudy to milky appearance, or free water in bottom of reservoir), and rancid fluid odor (indicating excessive heat). The BDP-10L units normally do not require regular fluid changes.
  • Page 18 Notes:...

  • Page 19: Encore Warranty

    ENCORE WARRANTY For Prowler and Z Series Mowers (excluding the Z 34) This warranty extends to the original retail purchaser only and commences on the date of original retail purchase. Any part of the Encore commercial mower manufactured by Encore Mfg. Co., Inc. and found in reasonable judgment of Encore Mfg. Co., Inc. to be defective in material or workmanship will be repaired or replaced by an Authorized Encore Dealer without charge for parts and labor.
  • Page 20 1102 A ,ENCORE MANUFACTURING CO., INC. 52K650Z - OPERATORS MANUAL All rights reserved. Contents subject to change. Z SERIES 933077 umber...

Table of Contents