1. Manuals
  2. Brands
  3. ATP Electronics Manuals
  4. Test Equipment
  5. ADT-22
  6. Instruction manual

ATP Electronics ADT-22 Instruction Manual

Multi-function environment meter
Hide thumbs

Advertisement

Table of Contents

INSTRUCTION MANUAL
Multi-Function Environment Meter
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ADT-22 and is the answer not in the manual?

Questions and answers

Summary of Contents for ATP Electronics ADT-22

  • Page 1 INSTRUCTION MANUAL Multi-Function Environment Meter...

  • Page 2: Table Of Contents

    4 IN 1 SOUND LEVEL LIGHT HUMIDITY TEMPERATURE TABLET OF CONTENTS TITLE INTRODUCTION FEATURES SPECIFICATIONS PANEL DESCRIPTION OPERATING INSTRUCTION MAINTENANCE 1. INTRODUCTION Multi-Function Environment Meter The 4 in 1 digital multi- has been designed to combine the functions of Sound Level Meter, Light Meter, Humidity Meter, Temperature Meter .

  • Page 3: Features

    The Sound Level function can be used to measure noise in factories, schools, offices, airports, home, etc., checking acoustics of studios, auditoriums and hi-fi installations. The Light function is used to measure illuminance in the field. It is fully cosine corrected for the angular incidence of light. The light sensitive component used in the meter is a very Stable, long life silicon diode.

  • Page 4: Specifications

    3. SPECIFICATIONS Display: 1999 counts LCD display with function of Lux, C, %RH and dB indication. Polarity: Automatic, (-) negative polarity indication. Over-range: “OL” mark indication. Low battery indication: The “BAT” is displayed when the battery voltage drops below the operating level. Measurement rate: 1.5 times per second, nominal.
  • Page 5 Microphone: Electric condenser microphone. Light Measuring Range:20, 200, 2000, 20,000lux (20,000lux range reading x10) Overrate Display: Highest digit of “1” is displayed. Accuracy: +5% rdg + 10 dgts (calibrated to standard incandescent lamp at color temperature 2856 k ) . Repeatability: + 2%.

  • Page 6: Panel Description

    PANEL DESCRIPTION LCD display: 3 1/2 digits LCD display with units of Lux, x10 Lux, C, %RH, dB and low battery “BAT” indication. Power / Function / Range Switch: Turn power on (or off) and select measurement function and ranges. Microphone: Electric condenser microphone inside.
  • Page 7 6. Note: Strong wind (over 10m/sec.) striking the microphone can cause misreading for measurement in windy locations, a windscreen should be used in front of microphone. Measuring Light 1. Turn the Power/function/range Switch to select the “lux” scale and set the range to desired (“lux” or “x10 lux”) range. 2.
  • Page 8                      Wavelengthnm) 7. Recommended Illumination:Locations Lux*Office Conference, Reception room. 200 ~ 750 Clerical work 700 ~ 1,500 Typing drafting 1000 ~ 2,000 *Factory Packing work, Entrance passage 150 ~ 300...
  • Page 9 Medical Examination room 300 ~ 750 Operating room Emergency Treatment 750 ~ 1,500 *School Auditorium, Indoor Gymnasium 100 ~ 300 Class room 200 ~ 750 Laboratory Library Drafting room 500 ~ 1,500 Measuring Humidity/Temperature 1. Humidity Measurement: ① Set the Power/function/range Switch to “%RH” position .

  • Page 10: Maintenance

    ② Then the display will show the environment temperature reading value ( C/℉) directly. ③Insert the temperature probe into the K-type thermocouple socket. ④ Touch the end of the temperature sensor to the area or surface of the object to be measured. The display will show the temperature reading value ( C/℉) directly.

Table of Contents