Page 3
Connect the USB terminal on the USB Interface U-100 to a USB connector on your computer. With the computer in operation mode the LED indicator on the U-100 will detect the input data and glow blue to show the presence of a digital input signal.
CONNECTIONS Connect to PC/Mac USB Terminal Connect to DAC Digital Inputs SPECIFICATIONS Input Bit Depth 16 bits and 24 bits/32 kHz, 44.1 kHz, 48 kHz, 96 kHz Digital Input USB 1.1 and 2.0 compliant Digital Outputs S/PDIF coaxial digital Toslink optical digital Digital output level 0.5V pp Sampling rate...
Volume control is set to minimum. Turn volume control up to desired level. Should the above symptoms persist with all instructions observed, your U-100 USB Interface may require servicing. SERVICE AND WARRANTY Please refer to the accompanying warranty card.