Download Print this page

PhotoGPS PGPS-01 User Manual

Advertisement

Quick Links

PhotoGPS User Manual
S10-0209-UM01-V1.1R
Model No. PGPS-01
1. Intended User
This product is intended for working with your own photos taken by your own camera to obtain full record for your trip and
field study by merging your PHOTOS with TIME and LOCATION.
2. Delivery Content
PhotoGPS Unit
USB Cable
AAA Battery x 3

3. System Requirement

PC (with Windows XP / Vista / Window 7)

4. Safety Instructions

We do not assume liability for resulting damages to property or personal injury if the product has been abused in any way
or damaged by improper use of failure to observe these operating instructions. The warranty/guarantee will then expire!
Persons/Product
The product is not a toy and should be kept out of reach of children.
When used in conjunction with other devices, observe the operating
instructions and safety notices of connected devices
The product must not be subjected to heavy mechanical stress.
The product must not be exposed it to extreme temperatures, direct
sunlight, intense vibration or dampness.
If there is reason to believe that safe operation is no longer possible,
the device is to be put out of operation and secured against
unintended operation. Safe operation is no longer possible if the
device:
5. Operation
Switch On the PhotoGPS unit when you start your
field trip in open area
Take GPS data during field trip (by pressing the
"mark" button manually or let the unit auto take
data)
By pressing "mode" button to switch different page
to display different data such as longitude, latitude
and altitude, speed, course, time, position,
altitude, total distance and system info.
Switch Off the PhotoGPS after you finished your
field trip (in order to save power)
Connect the PhotoGPS unit to PC by USB cable
Upload the GPS data to PC by copy and paste the
data file from the memory drive to PC hard disk
Copy the photo files from Camera to PC
Run our PC software to link up the photos taken by
any camera with the uploaded GPS data
Your photos and track will then be displayed in the
software with Google Earth or Google Map plug-in

5.1 Software Installation

Download the PhotoGPS Software from
Run the installation file and follow the instruction of the installation process
Install Google Earth Plugin
User Manual
PC Software Downloads Instruction
1 year Warranty Registration Card
http://www.sengital.com/PhotoGPS/
Show visible damages,
No longer works,
Was stored under unfavorable conditions for a long
period of time or
Was subject to considerable transport stress
Miscellaneous
Servicing, adjustment or repair works must only be
carried out by a specialist/specialist workshop.
If any questions arise that are not answered in this
user manual, contact our Technical Advisory Service.

Advertisement

loading

Summary of Contents for PhotoGPS PGPS-01

  • Page 1: System Requirement

    Technical Advisory Service. device: 5. Operation  Switch On the PhotoGPS unit when you start your field trip in open area  Take GPS data during field trip (by pressing the “mark” button manually or let the unit auto take data) ...
  • Page 2: Firmware Update

    There are two ways to sync the time of the PhotoGPS unit: 1) By GPS clock and 2) By PC 1) To sync the time by GPS, the user can switch on the PhotoGPS unit in open area to get GPS signal. Then the time will be set automatically.