Westinghouse VR-3710 User Manual page 26

Initial Setup (continued)
7. Channel scan select
Press
ENTER button to the next step.
8. ATSC channel access selection
Some of the ATSC channel require the access code.
Press
next step. The 5 digit access code provided by the channel access service.
Antenna [ATSC] Channel Access
Antenna users need a Channel Access Code in order to perform
a channel scan and receive broadcast signals.
Web: www.westinghousedigital.com/support;
select Channel Access and enter Access Info
Text Message: Text Tuner to 95495
Phone: 1-800-701-0680 follow instructions
Select Next to obtain the Access code.
Next
Back
: Return
R SC 8- A- _G B_27 Apr 11. i ndd 25
and button to select Antenna [ATSC] or Cable, and then press
Scan Channels from Antenna or coaxial cable input
Use the Up or Down key arrows on you remote control to select
the channel scan type.
Antenna [ATSC]
Cable
Back
: Move
: Return
and button to select "Next" and then press ENTER button to
: Press to Execute
: Move
: Press to Execute
Antenna [ATSC] Channel Access Information
To access channel scan you will need the following access Info:
Model: VR-3725
Serial No.: XXXXXXXXXXXXX
Channel Scan Type: ATSC
Provide these items to Westinghouse's channel access service
by wet, text, or phone to obtain an Access Code, then select
Next to input access code.
Next
Back
: Return
Enter Channel Access Code
Using your remote control to enter the 5 digit access code
provided by the channel access service.
Back
: Enter password
: Return 0-9
: Move : Press to Execute
5 2 -
2011- 4- 27 10: 55: 45