Charge The Battery - GoTab GW10 Getting Started

CHARGE THE BATTERY

Your GoTab's battery comes partially charged, so we recommend you charge it
for ~3 hours using the power adaptor provided. You can use it during this
time, just keep it plugged in!
Note: To check the current charge level of the battery, press the
located at the bottom right of the screen.
Note: Battery Life depends on usage. Only use an authorised DC Charger as an
incorrect power supply can damage the GoTab, invalidating your Guarantee.
• DO NOT attempt to change the battery yourself.
• CAUTION: Danger of explosion if batteries are incorrectly replaced.
• NEVER use/charge the battery if it's leaking, discoloured, deformed or
abnormal.
• NEVER expose the battery to any liquid.
• NEVER expose the battery to excessive heat such as direct sunlight or fire.
• NEVER throw batteries in a fire or attempt to open the outer casing.
• Batteries are harmful if swallowed. Keep out of reach of infants & children.
TURN YOUR GOTAB ON
Power ON Press and hold the power button on the side edge of the GoTab, and
it will turn on and load Windows. Slide the lock screen up to enter Windows.
Power OFF The power button is in the Start menu. Press it and you can choose
to shut down or restart the GoTab, or put it into sleep mode. Slide your nger
downward on the screen to turn o the GoTab
Sleep mode To quickly put your tablet into Sleep mode, press the Power button
on the edge of your GoTab once. The screen will switch o and your tablet will
enter its battery saving Sleep mode.
Wake up To wake the tablet from Sleep mode, press the Power button once.
ACCESSIBILITY
Setting up your GoTab to make it more accessible only takes a few steps. Most
Ease of Access options are available in Settings. Press Start
Settings > Ease of Access.
Narrator lets you hear audio descriptions, e.g. for text and buttons.
Make your screen content bigger using Magni er or use high-contrast mode.
Windows Speech Recognition lets you control your PC with your voice alone.
icon
and select