Initial Setup - Naxa NTD-2255 Instruction Manual

Initial Setup

A setup wizard menu will appear the first time you turn
on the TV. Adjusting the options on this menu will help
you get your TV ready for use.
• Press the CH–/CH+ buttons on the TV to select an
option.
• Press the VOL–/VOL+ buttons on the TV to adjust a
selected option.
• Press MENU to return to the previous screen and to
exit the menu when you are finished adjusting the
options.
L ⚠
You may also use the arrow keys on the
remote control as indicated on screen.
www.naxa.com
Menu Set the system menu language.
Language
Air/Cable Set the antenna system that will be used with
the TV.
• Select Air if you are using an antenna to receive
over-the-air TV broadcasts.
• Select Cable if you are using a cable TV system.
Cable Set the cable system type. (This option cannot be
System adjusted if the Air/Cable option is set to Air.)
• Select Auto, Std, IRC, or HRC to match your
cable system type.
Note: Select AUTO if you are not familiar with your
cable system type.
Auto Scan Automatically detect available channels and
save them to the Channel list.
Note: Set the Air/Cable and Cable System options
above before using the Auto Scan feature.
L ⚠
The Setup Wizard options can also be set in
the TV system menu. Set the source mode
to TV, then press MENU to access the TV
system menu.
Page 27