Activating The Gps - Michelin Navigation Owner's Manual

2.3. Activating the GPS

After connecting the ViaMichelin Navigation X-930 and installing the software on the SD
rd
card, press the 3
settings page:
•
The green "V" means that the GPS is on.
•
"NO FIX/FIX: 2D/FIX:
positioning.
•
"SAT" indicates the number of satellites used to calculate your position.
•
The vertical bars show the satellites detected:
- Grey: the device is receiving satellite signals but is not yet using them to establish
your position.
- Green: the device is using the satellite signals to calculate your position.
•
The numbers under the vertical bars give the satellite number.
•
Coordinates: longitude and latitude calculated by the system.
•
Direction arrow: shows the direction of travel between 2 position calculations by the GPS.
When using the ViaMichelin Navigation X-930 for the first time, we recommend you do so
in an open space in order to ensure the best possible satellite reception. Activating the GPS
system for the first time can take several minutes, depending on the surroundings and GPS
signal reception.
4
button from top on the front. This will take you directly to the GPS
3D" indicates better signal reception, and therefore more accurate