Lexus LS460 Quick Manual page 56

■
Adjusting the set speed
■
Changing the vehicle-to-vehicle distance
Preceding vehicle mark
The vehicle-to-vehicle distance control mode maintains the preset cruising speed as long
as no vehicle is detected ahead.
■
Resuming follow-up cruising when the vehicle has been stopped by system
control
LS460_460L_QG_U
1
2
Pressing the button changes the vehicle-to-
Type A
vehicle distance as follows:
1
2
Type B
3
After the vehicle ahead of you starts off,
push the lever up.
Your vehicle will also resume follow-up
cruising if the accelerator pedal is
depressed after the vehicle ahead of you
starts off.
Increases the speed
(Except when the vehicle has been
stopped by system control in vehicle-
to-vehicle distance control mode)
Decreases the speed
Fine adjustment: Momentarily move
the lever in the desired direction.
Large adjustment: Hold the lever in the
desired direction.
Long
Medium
Short
The vehicle-to-vehicle distance is set
automatically to long mode when the
engine switch is turned to IGNITION
ON mode.
If a vehicle is running ahead of you, the
preceding vehicle mark will also be
displayed.
56