Page 1
LCD display solutions User Manual 21.5” FHD 1920 x 1080 LCD with Digital TV AP-F21-TV Aluminum front bezel NAP-F21-TV Front NEMA4 / IP65 OP-F21-TV Universal Mounting Open Frame Designed and manufactured by Austin Hughes UM-UV-621-F21-TV-Q116V1 www.austin-hughes.com...
Page 3
Legal Information First English printing, October 2002 Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment.
Page 5
Before Installation ■ It is very important to mount the equipment in a suitable cabinet or on a stable surface. ■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration. Unpacking The equipment comes with the standard parts shown in package content.
Page 6
< Part 1 > < 1.1 > Package Content - AP / NAP-F21-TV AP-F21 / NAP-F21-TV 21.5" FHD LCD display X 1 6ft VGA cable X 1 Power adapter X 1 Power cord X 1 Mounting hardware X 1 pack - Mounting bracket x 4 pcs - M4* 6mm screw x 8 pcs - M4* 50mm screw x 8 pcs...
< 1.2 > Dimension - AP / NAP-F21-TV Front View Side View AP-F21-TV NAP-F21-TV Rear View UNIT : mm 1mm = 0.03937 inch Bottom View UM-UV-621-F21-TV-Q116V1 www.austin-hughes.com...
Page 9
< 1.3 > Panel Mount Installation - AP / NAP-F21-TV 21.5" FHD LCD Display M4*50mm screw M4*6mm screw Mounting bracket x 8 pcs x 8 pcs x 4 pcs Hardware set part no. UV-BK#2 Steps ■ Install 4 mounting brackets with 8 x M4*6mm screws ■...
Page 10
< 1.3 > VESA mount Installation - AP / NAP-F21-TV M4 screw VESA mount ( 100*100mm ) ■ Hardware and M4*4 pcs for VESA mount are not provided UM-UV-621-F21-TV-Q116V1 www.austin-hughes.com...
< Part 2 > < 2.1 > Package Content - OP-F21-TV 21.5" FHD LCD Display OP-F21-TV 21.5" FHD LCD display X 1 6ft VGA cable X 1 Power adapter X 1 Power cord X 1 Basic I/O HDMI Audio in R C A Audio Firmware...
Page 12
< 2.2 > Structure Diagram - OP-F21-TV Front view OP-F21-TV Rear view Rear case LCD panel Audio speaker, pair Universal open frame mounting LCD membrane Extended remote sensor membrane cable ( 66cm from AD board to sensor end ) Product Dimension Packing Dimension Gross Model...
< 2.2 > Dimension - OP-F21-TV 21.5” FHD LCD Display Front View Side View OP-F21-TV UNIT : mm Rear View 1mm = 0.03937 inch Bottom View UM-UV-621-F21-TV-Q116V1 www.austin-hughes.com...
Page 14
< 2.3 > Installation - OP-F21-TV ( I ) Universal mount ( II ) VESA mount ( 100*100mm ) M4 screw Hardware and M4*4 pcs for VESA mounting are not provided UM-UV-621-F21-TV-Q116V1 www.austin-hughes.com...
< 3.2 > On-screen Display Operation ( OSD ) 21.5” FHD LCD Display Power light Green = On Orange = Power saving Membrane Switch Function Power on / off LCD Display the OSD menu Scrolls through menu options and adjusts the displayed control (To auto adjustment by pressing the button for 5 seconds) Exit the OSD screen...
< Part 4 > Digital TV - ATSC < 4.1 > Remote Controller P.13 UM-UV-621-F21-TV-Q116V1 www.austin-hughes.com...
Page 19
21.5” FHD LCD Display Mute or restore sound MUTE Select a channel directly or enter the numbers in the menus Set input single or double digits -/-- COLOR keys. RED / GREEN / Only effective when indicated in the operation guide YELLOW / CYAN ASPECT key to select different image sizes 16:9...
< 4.2 > On-screen Display Operation ( OSD ) Press MENU key to display menu or close the current menu and open the previous menu. And press LEFT / RIGHT to select sub menu. Press ENTER key to sub menu. <...
Page 21
21.5” FHD LCD Display < 4.2.1.1 > Auto Scan Menu Press ENTER key to enter the submenu, press LEFT / RIGHT keys to select yes or no. If you choose yes, then you can start the automatic tuning process. Press MENU key to stop the process. After a few minutes the tuning will fi...
< 4.2.2 > Picture Menu Enter Picture Menu, you can select Picture Mode, Color Mode, Zoom Mode, 3DNR, Backlight, DLC and Color Range items by pressing UP / DOWN keys. ■ Press UP / DOWN keys to select the different items. ■...
Page 23
21.5” FHD LCD Display < 4.2.2.2 > Color Mode Menu ■ Press LEFT / RIGHT keys to select the picture mode. If [User] is selected, adjust the items below. ■ Press UP / DOWN keys to select different setting. ■ Press LEFT / RIGHT keys to change the value. ■...
Page 24
< 4.2.2.4 > Backlight Menu ■ Press UP / DOWN keys to select different setting. ■ Press LEFT / RIGHT keys to change the value. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. <...
Page 25
21.5” FHD LCD Display < 4.2.2.6 > Advanced Menu ■ Press ENTER key to enter the Advanced menu if you are in VGA source. ■ Press ▲/▼ keys to select different setting. ■ Use ◄/► keys to adjust the horizontal position of the window. ■...
< 4.2.3 > Audio Menu Enter Audio menu, you can select Equalizer Standard, MTS, Audio Language, SPDIF Type, Surround Sound, Audio Only and AVC items by pressing UP / DOWN keys. ■ Press UP / DOWN keys to select the different items. ■...
Page 27
21.5” FHD LCD Display < 4.2.3.2 > MTS Menu ( only in ATV ) ■ Press UP / DOWN keys to select different setting. ■ Press ENTER key to set. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. <...
Page 28
< 4.2.4 > Timer Menu Enter Time menu, you can select Sleep Timer, Time Zone, DST, Time Format, Auto Sync, Clock, Wake Up, 3D Type 2D, 3D Detect and 3D_LR items by pressing UP / DOWN keys. ■ Press UP / DOWN keys to select the different items. ■...
21.5” FHD LCD Display < 4.2.4.2 > Time Zone Menu ■ Press UP / DOWN keys to select different setting. ■ Press ENTER key to set. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. <...
Page 30
< 4.2.4.4 > Wake Up Menu ■ Press UP / DOWN keys to select different setting. ■ Press LEFT / RIGHT keys to change the value. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. <...
21.5” FHD LCD Display < 4.2.5 > Setup Menu Enter Setup menu, you can select Menu Language, Transparent, OSD Time Out, Closed Caption, Restore Default, Setup Wizard, Software Update (USB) and CEC items by pressing UP / DOWN keys. ■ Press UP / DOWN keys to select the different items. ■...
Page 32
< 4.2.5.2 > Transparent Menu ■ Press UP / DOWN keys to select different setting. ■ Press ENTER key to set. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. < 4.2.5.3 > OSD Time Out Menu ■...
Page 33
21.5” FHD LCD Display < 4.2.5.4 > Closed Caption Menu ■ Press UP / DOWN keys to select different setting. ■ Press LEFT / RIGHT keys to change the value. ■ Press ENTER key to enter the sub-menu. ■ Press MENU key to return the previous menu. ■...
Page 34
< 4.2.5.5 > Restore Default Menu ■ Press ENTER key to enter the restore menu. ■ Press LEFT / RIGHT keys to select yes or no. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. <...
Page 35
21.5” FHD LCD Display < 4.2.5.7 > Software Update ( USB ) Menu ■ Press ENTER key to enter the restore menu. ■ Press LEFT / RIGHT keys to select yes or no. ■ Press MENU key to return the previous menu. ■...
< 4.2.6 > Lock Menu Followed by the Lock Menu, Enter Password, Change Password, System Lock, Input Block, US, Canada, RRT Setting and Reset RRT are the items, which can be selected by pressing UP / DOWN keys. RRT Setting and Reset RRT are only available in DTV when the program has RRT.
Page 37
21.5” FHD LCD Display < 4.2.6.1 > Change Password Menu ■ To change password, you need to enter the old password. After enter old password, you can enter the new password and confi rm password, which consists of only digits. The new password and Confi rm password must be same.
Page 38
< 4.2.6.3.1 > TV Rating Menu ■ Press UP / DOWN keys to select different setting. ■ Press ENTER key to set the select. ■ Press MENU key to return the previous menu. ■ Press EXIT key to exit the main menu. <...
Page 39
21.5” FHD LCD Display < 4.2.6.4.1 > Canada EngMenu ■ Press UP / DOWN and LEFT / RIGHT keys to select different setting. ■ Press ENTER key to set the select. ■ Press MENU key to return the previous menu. ■...
Page 40
The company reserves the right to modify product specifi cations without prior notice and assumes no responsibility for any error which may appear in this publication. All brand names, logo and registered trademarks are properties of their respective owners. Copyright 2016 Austin Hughes Electronics Ltd. All rights reserved. UM-UV-621-F21-TV-Q116V1 www.austin-hughes.com...