Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for GNS NR31P4-4
- Page 1 Network Video Recorder Quick Operation Guide...
-
Page 2: Table Of Contents
Quick Operation Guide of Network Video Recorder TABLE OF CONTENTS NVR Pre-Installation ............................4 NVR Installation .............................. 4 Hard Disk Installation ............................. 4 Front Panel ............................... 6 Rear Panel ................................ 7 Specifications ..............................8 Specification .............................. 8 HDD Storage Calculation Chart ......................... 9 Accessing by Web Browser .......................... - Page 3 Quick Operation Guide of Network Video Recorder Regulatory information FCC information This equipment has been tested and found to comply with the limits for a digital device, pursuant compliance: to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
-
Page 4: Trademarks And Registered Trademarks
Quick Operation Guide of Network Video Recorder Trademarks and Registered Trademarks • Windows and Windows mark are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. • HDMI, HDMI mark and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. -
Page 5: Nvr Pre-Installation
Quick Operation Guide of Network Video Recorder Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact dealer. This manual is for reference only. NVR Pre-Installation The NVR is highly advanced surveillance equipment that should be installed with care. Please take into consideration the following precautionary steps before installation of the NVR. - Page 6 Quick Operation Guide of Network Video Recorder 3. Connect the power cable to the HDD. 4. Place the HDD on the bottom of the device and then fasten the screws on the bottom to fix the HDD. 5. Re-install the cover of the NVR and fasten screws.
-
Page 7: Front Panel
Quick Operation Guide of Network Video Recorder Front Panel Name Function Description POWER indicator turns green when DVR is powered up. POWER STATUS indicator lights in red when data is being read from or written to HDD. STATUS Tx/Rx indictor blinks green when network connection is functioning properly. Tx/Rx The DIRECTION buttons are used to navigate between different fields and items in menus. -
Page 8: Rear Panel
Quick Operation Guide of Network Video Recorder Rear Panel The rear panel vaires according to different models. Item Description Power Supply 48V DC power supply for 4ch model and AC 100~240V for 8ch and 16ch models. Audio In RCA connector for audio input. HDMI Interface HDMI video output connector. -
Page 9: Specifications
Quick Operation Guide of Network Video Recorder Specifications Specification Model 16ch IP video input 4-ch 8-ch 16-ch Video/Audio Two-way audio 1-ch, RCA (2.0 Vp-p, 1kΩ) input input Incoming bandwidth 25Mbps 50Mbps 100Mbps Network Outgoing bandwidth 80Mbps Remote connection 6MP/5MP/3MP/1080P/UXGA/720P/VGA/4CIF/DCIF/2CIF/CI Recording resolution F/QCIF Main stream: 50 fps (P) / 60 fps (N) Frame rate... -
Page 10: Hdd Storage Calculation Chart
Quick Operation Guide of Network Video Recorder HDD Storage Calculation Chart The following chart shows an estimation of storage space used based on recording at one channel for an hour at a fixed bit rate. Bit Rate Storage Used 128K 160K 192K 224K... -
Page 11: Accessing By Web Browser
Quick Operation Guide of Network Video Recorder Accessing by Web Browser Logging In You can get access to the device via web browser. Open web browser, input the IP address of the device and then press Enter. The login interface appears. Input the user name and password, and click the Login button. -
Page 12: Recording
Quick Operation Guide of Network Video Recorder Interface Introduction Name Description Displays the list of channels and the playing and recording status of each channel. Channel List The stream type can be switched by clicking the icon before the channel name: stands for main stream and for sub-stream. - Page 13 Quick Operation Guide of Network Video Recorder interface. 2. Select the camera to configure the record schedule. 3. Check the checkbox of Enable Schedule to enable recording schedule. 4. Choose the day in a week to configure scheduled recording. 5. Click Edit to edit record schedule. Configure All Day or Customize Record: ...
-
Page 14: Playback
Quick Operation Guide of Network Video Recorder Playback The playback interface may differ according to different models. Interface Introduction Name Description Channel List Displays the list of channels and the playing status of each channel. Playback Window Displays the image of channel. Play Control Bar Play control operations are supported. -
Page 15: Log
Quick Operation Guide of Network Video Recorder 6. You can drag the progress bar with the mouse to locate the exact playback point. You can also input the time in the textbox and click button to locate the playback point. The color of the video on the progress bar stands for the different video types. -
Page 16: Menu Operation
Quick Operation Guide of Network Video Recorder Menu Operation Menu Structure Menu Playback Maintenance Shutdown Export Manual Record Camera Configuration Normal Record General Schedule Camera General System Info Logout Event Alarm Advanced Parameters Network Shutdown Information Advanced Image Alarm Reboot Import/Export Holiday Live View... -
Page 17: Live View
Quick Operation Guide of Network Video Recorder 2. Select the Shutdown button. 3. Click the Yes button. 4. Turn off the power switch on the rear panel when the attention pops up. Live View Some icons are provided on screen in Live View mode to indicate different camera status. These icons include: Live View Icons In the live view mode, there are icons at the upper-right corner of the screen for each channel, showing the status of the record and alarm in the channel, so that you can find problems as soon as possible. - Page 18 Quick Operation Guide of Network Video Recorder 2. Select Add IP Camera in the pop-up menu to enter the IP Camera Management interface. The online cameras with same network segment will be displayed in the camera list. Click the button to add the camera.
-
Page 19: Recording
Quick Operation Guide of Network Video Recorder (For the encoders with multiple channels only) check the of Channel No. in the pop-up window, checkbox as shown in the following figure, and click OK to finish adding. Recording Before you start: Make sure that the HDD has already been installed. - Page 20 Quick Operation Guide of Network Video Recorder Only record files recorded during the past five minutes on this channel will be played back. Option 2: Steps: 1. Enter the Playback menu. Mouse: right click a channel in live view mode and select Playback from the menu. Front Panel (if available): press PLAY button to play back record files of the channel under single-screen live view.
-
Page 21: Backup
Quick Operation Guide of Network Video Recorder Just check the channel or channels if you want to switch playback to another channel or execute simultaneous playback of multiple channels. Backup Recorded files can be backed up to various devices, such as USB flash drives, USB HDDs or a DVD writer. Steps: 1. - Page 22 Quick Operation Guide of Network Video Recorder...