Table of Contents
Advertisement
n
Power On/Off
Turn the Power switch/Volume controller clockwise to power your two-way radio on.
Turn the Power switch/Volume controller anticlockwise to power your two-way radio
off.
n
Adjust Volume
Turn the Power switch - Volume controller to adjust the volume: clockwise to increase
volume and anti-clockwise to reduce volume.
When you communicate with the other party, it is important to adjust the volume
l
correctly.
n
Select a Channel
Use a channel encoder to select the desired channel 1 to 16. Clockwise selection can
increase channel number while anti-clockwise selection can reduce channel number.
Number reporting: your two-way radio give an alert tone to prompt you with the
current channel number which the encoder turns to.
n
Call
1. Firstly check that the channel you use is not occupied by other two-way radio.
2. Press and hold PTT key and talk to Mic.
TX status:
●
1） Keep 3-4 cm away from Mic and talk to Mic with normal tone to obtain
the best quality.
2） When pressing the PTT key, if the LED lights red, Tx is in progress.
3） Call number and frequency display when pressing the PTT key.
3. Releasing the PTT key, your two-way radio exits from TX status and enters RX status.
Intro Screen
Advertisement
Table of Contents
