Download Print this page

Phase DP4000 Owners Manual/Install Manual

Digital audio reference theater system
Hide thumbs Also See for DP4000:

Advertisement

Quick Links

[dARTS:
DIGITAL AUDIO REFERENCE
THEATER
SYSTEM]
DP4000
OWNER'S MANUAL & INSTALL GUIDE

Advertisement

loading

Summary of Contents for Phase DP4000

  • Page 1 [dARTS: DIGITAL AUDIO REFERENCE THEATER SYSTEM] DP4000 OWNER’S MANUAL & INSTALL GUIDE...
  • Page 2 SPEAKER PLACEMENT please contact one of our authorized dealers for assistance, SYSTEM WIRING & CONNECTIONS or contact us directly. CONNECTIONS FROM DP4000 TO SURROUND PREAMP/RECEIVER CONNECTIONS FROM DP4000 TO SYSTEM’SSPEAKERS: 1-16 BACK PANEL DETAILS Phase Technology ®...
  • Page 3 [SAFETY INSTRUCTIONS] that may impede the flow of air through the ventilation openings. 9. Heat - The appliance should be situated away from heat sources CAUTION such as radiators, stoves, or other appliances that produce heat. RISK OF ELECTRIC SHOCK DO NOT OPEN 10.
  • Page 4 Phase Technology’s perfectly matched speakers, and the Audyssey Laboratories MultEQ ®...
  • Page 5 [SPEAKER PLACEMENT] Phase Technology’s ability to precisely match each speaker to one another yields a much more enveloping and accurate soundfield. This immersive entertainment experience will be enhanced if you will follow a few basic rules of speaker placement. The front speakers (left, center, right) should all be placed in as close to a horizontal line as possible, and should be at or slightly above ear level while seated.
  • Page 6 DP4000 with either two or three pairs of speaker wire. Your surround processor or receiver’s preamp outputs will also be connected to the DP4000. If desired, your installer can connect a 12 V DC trigger to the amplifier’s “POWER CONTROL IN”...
  • Page 7 [CONNECTIONS FROM DP4000 TO SYSTEM’S SPEAKERS: 1-16] SPEAKER CONNECTIONS DP OUTPUT NUMBERS INPUT XLR INPUT 1: LEFT FRONT WOOFER 1: LEFT FRONT SPEAKER 2: LEFT FRONT TWEETER 1: LEFT FRONT SPEAKER 3: RIGHT FRONT WOOFER 2: RIGHT FRONT SPEAKER 4: RIGHT FRONT TWEETER...
  • Page 8 [CARING FOR YOUR PHASE TECHNOLOGY SPEAKER] The DP4000 is molded in an aluminum enclosure and finished with a high degree of craftsmanship. We recommend using a lint-free rag with a small amount of glass cleaner to maintain the long-lasting beauty of the finish. Avoid products containing silicones, oils, oil derivatives, or solvents.
  • Page 9 Copyright © 2014 MS Electronics, LLC. All rights reserved. MSE Audio, Phase Technology and PhaseTech are registered trademarks and “Speakers for your Life” is a trademark of MSE Audio, Overland Park, Kansas USA. Phase Technology is part of MSE Audio ®...