Table of Contents
Advertisement
Advertisement
Table of Contents
Summary of Contents for BDI BDI-747
- Page 1 BDI-747 User Guide (877) 238- 4492 www.blowanddrive.com...
-
Page 2: Table Of Contents
Table of Contents The BDI-747 User Guide ..........2 The BDI-747 Ignition Interlock Device: ......3 Reading the Lights on your BDI-747: ......4 Starting Your Vehicle:............5 Standard Test: ............. 5 Test Results: ..............6 Rolling Retests: ............6 Service Requirements: ............ -
Page 3: The Bdi-747 User Guide
If you have any problems, or do not understand proper operation of the BDI-747 Ignition Interlock Device, please call Blow & Drive Interlock Inc. during normal business hours at: (877) 238 -4492... -
Page 4: The Bdi-747 Ignition Interlock Device
The BDI-747 Ignition Interlock Device: The BDI-747 Ignition Interlock Installed within your vehicle is an electronic breath alcohol analyzer. The BDI-747 Ignition Interlock is connected with the ignition and other control systems of your motor vehicle. The BDI-747 Ignition Interlock measures the BAC (Blood Alcohol Content) of the driver of your vehicle, and prevents the vehicle from being started if the driver’s... -
Page 5: Reading The Lights On Your Bdi-747
Handset Locked (Must Reboot): Left Light = Red Right Light = Solid Blue (To reboot the handset at any time hold down all three buttons for about five seconds until the screen flashes Reading the Lights on your BDI-747: |... -
Page 6: Starting Your Vehicle
or turns off. Then release the buttons. The device will reboot.) To Enter Password Mode: Power to handset must be on & the screen must be blank. Hold down the right button and then turn the car to the on (Acc) position. Tap the password box, a number pad will appear. -
Page 7: Test Results
Test Results: If you were successful, the display will read “Test Passed”. You have 2 minutes to start the vehicle. If you were unsuccessful, the display may read “Blow test error, Please try again”. You did not blow hard enough or long enough to complete the test. You may immediately attempt another breath test. -
Page 8: Service Requirements
prompts described in the Test Result section of this guide. Additional rolling retests will occur randomly during the operation of the vehicle depending on your state’s requirements. If you miss or fail a rolling retest the unit WILL NOT stop your vehicle, however, your vehicles horn will sound and your headlights will flash and an audible tone will be emitted from the unit until the vehicle is stopped. -
Page 9: Violations And Early Service Recalls
service days, the date displayed on the unit will change to indicate the day the unit will lock out. If the unit enters the stop service mode, you will need to contact Blow & Drive Interlock, Inc. for assistance. Violations and Early Service Recalls: Certain events will cause the interlock device to automatically enter an early service recall state. -
Page 10: Helpful Tips
• Failing or refusing a rolling retest will result in a retest violation. You will have 5 days to have the device serviced before it enters the Stop Service mode. • Repeatedly disconnecting the vehicle’s battery or having maintenance work done to the vehicle can also cause the unit to enter the early service mode. - Page 11 • Hold the middle button on the head to power down the device. • Retain all receipts for parts or service performed on your vehicle. It is highly recommended you be present for repairs to your vehicle. You will need to provide your interlock service center with these receipts if a bypass is recorded on your device.
-
Page 12: Bdi-747 Components
This prevents complete data loss in the event of a sample head malfunction. This portion of the device is located under the dash of your vehicle and is not accessible to the user. BDI-747 Components: |... -
Page 13: Defective Equipment
Defective Equipment: If it becomes necessary to repair or replace defective equipment, please contact Blow & Drive Interlock, Inc. to schedule a service appointment. BDI-747 Components: |... -
Page 14: Contact Information
Contact Information: Please contact your service center with any service, appointment, or payment inquiries. Blow & Drive Interlock, Inc. 877-238-4492 www.blowanddrive.com Office Hours: Monday – Friday 10AM to 4PM PST BLOW & DRIVE INTERLOCK, INC. SERVICE CENTERS: Call Blow & Drive Interlock, Inc. For Service Center Locations Contact Information: |...
Need help?
Do you have a question about the BDI-747 and is the answer not in the manual?
Questions and answers