2.6.2 Push Button Reset; Ending A Work Session - North Star Advantage User Manual

Hide thumbs Also See for Advantage:
Table of Contents

Advertisement

2.6.2 Push Button Reset
You can also reset the ADVANTAGE by
pushing the' button at the lower center of
the back panel (Fig. 2-14). This reset pm-
cedure has the same results, and carries the
same risks as the keyboard reset.
Resetting the ADVANTAGE
Figure 2-14
2.7
ENDING A WORK SESSION
2-12
The manual for the program you are running will explain how to back.up your diskettes and
exit from the program.
Be sure to remove any diskettes before turning off the power.
To protect your data, wait until the red indicator light on the disk drive goes out,
then remove the diskette.
Lift the latch on the disk drive and carefully remove the diskette. Replace the diskette in its
protective envelope and store it in a safe place.
At the end of the day, turn the power switch off.
ADVANTAGE User Manual

Advertisement

Table of Contents
loading

Table of Contents