Advertisement
I Cycle Descriptions 1
AUTO COTTON & LINEN
WRINKLE OUT
Cycle is designed to dry mostcottonsand linensautomatically.The
WRINKLE OUT isanoptionalfeaturewhichcan be selectedonlywith
elothesarecooledtoreducewrinklingforapproximatelylOminutesat
the AUTO PERMA PRESS cycle. It providesone hour of tumble
the end of the cycle,
withoutheatto minimizewrinklingif youare unableto removeclothes
after the first end of cycle buzzer sounds. If WRINKLE OUT is
AUTO PERMA PRESS
selected, the buzzer will continueto sound every five minutes to
Cycle is designed to dry all synthetic fabrics, double knits, end
remindyou that the clothesare ready to be removedfrom the dryer.
permanent press fabrics automatically. The clothes are cooled down
for 15 minutes at the end of the cycle to reduce wrinkling.
Clothes can be removed at anytime throughout WRINKLE OUT.
When clothes are removed before the end of WRINKLE OUT, turn
TIMED DRY
timer to OFF position to shut off buzzer.
The TIMED DRY cycle provides up to 110 minutes of drying time. The
clothes will continue to tumble during cool down for approximately 10
Drying Guide
minutes at the end to reduce wrinkTing.
Drying
Use TIMED DRY for very small loads (under 4 Ibs.).
Cycle Knob
Temperature
Use for these fabrics
AUTO
AUTO
100% Cotton
FLUFF DRY
co'n-ON & LINEN
Use the TIMED DRYwith FLUFF (noheat) temperature selection.This
AUTO
NORMAL or
Polyester-Cotton Blends
cyclefreshensarticlesorshouldbeusedforfoamorrubberizeditems.
PERMA PRESS
AUTO
Wool*
Polyester-Wool Blends*
COOL DOWN
AUTO
LOW
Acrylics
This period allowsthe clothesto reacha temperaturecomfottable for
PERMA PRESS
Modacrylics
handling and reduces the creation of wrinkles. Clothes can be
Acetates
removedat any time duringthis period. No significantenergy usage
Polyester-Acrylic Blends
is incurredas the heat is off and room temperatureair is used. Cool
100% Polyester
down occurs at the end of the cycle.
Nylon
TIMED DRY
FLUFF
Plastic,Rubber Items
TIMED DRY
LOW or
Most fabrics that are not
NORMAL
heat sensitive
* Check care label for temperature requirements.
6
Advertisement
