IMPORTANT Always switch off the cleaner and remove the plug from the mains power supply before cleaning your appliance, when not in use or attempting any maintenance task. The cleaner must only be connected to an AC power supply at the voltage shown on the rating label. This cleaner should only be used for its intended purpose as described in this instruction manual.
If the air inlet or floor head or tube are blocked, you should switch off the cleaner straight away and remove from mains power. First clear the blocked substance before attempting to start the vacuum cleaner again. WORK HERO 60L WET & DRY VACUUM STAINLESS STEEL 2300W MAX TWIN MOTORS – WD60LSS 01...
7. Hose Inlet Latches 6. Tank 12. Handle Reversal 9. Wet Pick Up Floor Tool 8. Tank Wheels 16. Combination Floor Tool 14. Crevice 15. Dusting Tool Brush 02 WORK HERO 60L WET & DRY VACUUM STAINLESS STEEL 2300W MAX TWIN MOTORS...
Page 5
5. Take the cable from the storage area and connect to the mains power supply. 6. Start the cleaner by pressing the On/Off button. WORK HERO 60L WET & DRY VACUUM STAINLESS STEEL 2300W MAX TWIN MOTORS – WD60LSS 03...
Page 6
Dusting Brush – ideal for cleaning furniture, curtains and upholstery Crevice Tool – ideal for cleaning in tight spaces Crevice Dusting Tool Brush 04 WORK HERO 60L WET & DRY VACUUM STAINLESS STEEL 2300W MAX TWIN MOTORS...
3. Wipe the machine inside and out from time to time , using only luke warm water. Before use always examine the power cable for cuts and/or damage. 4. Wet pick up accessories should be washed periodically. WORK HERO 60L WET & DRY VACUUM STAINLESS STEEL 2300W MAX TWIN MOTORS – WD60LSS 05...
5. Dry by airing for at least 24 hours. 6. Re-fit the filter and cloth bag into the machine. 24hr 24hr Cloth Bag 24hr 06 WORK HERO 60L WET & DRY VACUUM STAINLESS STEEL 2300W MAX TWIN MOTORS Cloth Bag...
4. Clean and wash the cloth bag where appropriate. 5. Remove the hose connector from the hose inlet and drain it thoroughly. Take out Drain WORK HERO 60L WET & DRY VACUUM STAINLESS STEEL 2300W MAX TWIN MOTORS – WD60LSS 07...
Solutions Pty Ltd (ACN 119 462 798) Level 1, Building 2 Brandon Business Park 530 Springvale Rd Glen Waverley, VIC 3150 Customer Care: 1800 815 270 Made in China TECHNICAL INFORMATION Model: WD60LSS 240V ~ 50Hz 2300 MAX V1 0313...
Need help?
Do you have a question about the WD60LSS and is the answer not in the manual?
Questions and answers