Table of Contents
Advertisement
I can't hear any sound from my analog speakers
Instructions:
1.
Xonar DX PCI Express audio card needs the power cable to supply addition
power in addition to the basic PCI Express bus power. Please double
check you have plugged the small 4-pin power plug onto Xonar DX power
connector. If you did not plug the internal power, Xonar DX audio center will
remind you a warning message and won't allow your operation when you
double click Xonar DX audio center icon in the system tray.
2.
Please ensure that you have connected speakers properly and have powered
on your speakers
3.
Please ensure that the device master volume or the software player has NOT
been muted on the Xonar DX Audio Center
4.
If you are using Dolby Digital Live encoder through the S/PDIF output, the
analog output will be muted to get rid of the interference between your digital
speaker system and analog speakers or headphones. Please check if this is
the case.
5.
Please go to the sound and audio device of Windows Control Panel to check
if the playback default device is set to Xonar DX Audio Device, instead of
other onboard AC97 or HDA codec device. If it's not, please set it to Xonar
DX Audio Device and restart your applications.
6.
Please try restart your Windows.
I can't hear audio input (Mic, Line-in, AUX, etc.) from my speakers
Instructions:
1.
Please go to the mixer recording page in the Audio Center and select the
correct input as the recording source. If you are using Windows Vista, please
also go to system audio control panel to see the current default recording/
input device is right.
2.
Please remember to turn on the digital monitoring button for that recording
source.
70
ASUS Xonar DX
Hide quick links:
Advertisement
Table of Contents
