Connecting To Ac Power Supply - Panasonic SC-CMAX5 Owner's Manual

1 Standby/on switch [Í], [Í/I]
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
2 Select audio source
On the unit:
To start Bluetooth
®
[ -PAIRING] when you are in Bluetooth
source.
3 Basic playback control buttons
4 Enter setup menu
5 Change the displayed information
6 Selection/OK
7 Set the sleep timer
8 Dim the display panel and turn off the
illumination
Press again to cancel.
9 Adjust the volume (0 (min.) to 50 (max.))
10 Mute the sound
Press again to cancel. "MUTE" is also canceled when
the volume is adjusted or the unit is turned off.
11 Set the play menu item
12 Enter sound menu
13 Microphone jack 2/Guitar input jack
14 Microphone jack 1

Connecting to AC power supply

This unit (rear)
Conserving power
The system consumes a small amount of power (l 19) even when it is in standby mode. Disconnect the power
supply if you do not use the system.
Some settings will be lost after you disconnect the system. You have to set them again.
pairing, press and hold
®
15 AUX IN 2 terminal
16 AUX IN 1 terminal
17 AUDIO OUT terminal
18 Enter KARAOKE mode
19 Select vocal cancel, echo or key control
20 Select the sound effects
21 [USB\A] [USB\B]
USB port for playback
USB status indicator
22 Remote control signal sensor
Distance: Within approx. 7 m (23 ft) directly in front
Angle: Approximately 20° up and down, 30° left
and right
23 Adjust the volume of microphone 1
24 Adjust the volume of microphone 2 or guitar
25 Microphone 2 or guitar switch (l 14)
26 Select the DJ jukebox (l 10)
27 Select MP3 album or track browsing mode
(l 9)
28 Change the illumination setting (l 11)
Browse MP3 tracks or albums (l 9)
Change DJ jukebox playback mode (l 10)
29 Display panel
Connect the AC power supply cord.
AC power supply cord (supplied)
To household
AC outlet
7
(ENG) RQT0A53